喜歡就充值下載吧。。。資源目錄里展示的全都有,,下載后全都有,,圖紙均為高清圖,,CAD圖紙可自行編輯,,有疑問咨詢QQ:1064457796
鏈輪的沖壓工藝及模具設計
摘 要
通過對制件的工藝計算及拉深翻邊時的受力,應力及金屬流動狀態進行分析,設計并改進了反拉深模的結構,保證了零件尺寸的要求,消除了料厚變薄等缺陷,此模具結構簡單,實用性強,提高勞動生產率,為防止制件起皺和拉裂常通過改善材料力學性能和合理確定凹模圓角半徑,同時分析了該制件的工藝性。設計了拉深模具,并介紹了所用模具材料特點。
拉深是利用拉深模具將沖裁好的平板毛坯壓制成各種開口的空心工件或?qū)⒁阎瞥傻拈_口空心件加工成其他形狀空心件的一種沖壓加工方法。翻邊時將毛坯或半成品的外邊緣或孔邊緣沿一定的曲線翻成豎立的邊緣沖壓方法的鏈輪是需要經過拉深翻邊,沖孔等工序才可完成。
當前模具工業發展有兩個特點:一是要縮短制模周期、降低制模成本。由于人們對工業晶的品種、數量和質量要求越來越高,產品更新?lián)Q代周期越來越短,而且多品種小批量生產較多,因此對模具制造提出了嚴格的要求。二是模具向大型化、復雜化、精密化和自動化發展。模具制造要求越來越高,制造工藝越來越復雜。
關鍵詞:拉深模 設計 料厚變薄 改進
鏈輪的沖壓工藝及模具設計
Abstract
Through the technological calculation of the product and the analysis of the exerted force ,stree and metal flowing status when drawing for ward and backward,the back ward drawing die was desingal and improved in its structure,which ensured the requirement of the part dimensions and eliminated some defects such as the material thickness becoming thinner,The structure of the die for the technological process is simple and practical,it can increase the production efficiency,in order to ensure the uniformity of the blanking clearance of the die ,inorganic adhesive is used to bord and fix the punch to eliminate manufacturing errors,after an analysis of the technological property of the producte,the dimensions of the blank were determined and the drawing die for the part was designeal the characteristics of the die material were introduced at last.
Keywords: backward drawing die design material thickness getting thinner improvement