喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有，，圖紙均為高清圖，，CAD圖紙可自行編輯，，有疑問咨詢QQ:1064457796
摘 要
塑料注射模具主要用來成型熱塑性塑料制品，但近年來越來越廣泛地用于成型熱固性塑料制品。
設計注射模具時，既要考慮塑料熔體流動行為等塑料加工工藝要求方面的問題，又要考慮模具制造裝配等模具結構方面的問題，歸納起來大致有以下幾個方面：
(1) 了解塑料熔體的流動行為，考慮塑料在流道和型腔各處流動的阻力，流動速度，校驗最大流動長度。根據塑料在模具內流動方向(即充模順序)，考慮塑料在模具內重新熔合和模腔內原有空氣導出的問題。
(2) 考慮冷卻過程中塑料收縮及補縮問題。
(3) 通過模具設計來控制塑料在模具內結晶、取向和改善制品的內應力。
(4) 進澆點和分型面的選擇問題。
(5) 制件的橫向分型抽芯及頂出的問題。
(6) 模具的冷卻或加熱問題。
(7) 模具有關尺寸與所有注射機的關系，包括與注射機的最大注射量、鎖模力、裝模部分的尺寸等的關系。
(8) 模具總體結構和零件形狀要簡單合理，模具應具有適當?shù)木取⒐鉂嵍?、強度和剛度，易于制造和裝配。
以上這些問題，并非孤立存在，而是相互影響的，應綜合加以考慮。
關鍵詞：型芯、型腔、澆口、澆注系統、脫模機構
ABSTRACT
Plastic injection mold is mainly used to molding thermoplastic plastics, but in recent years, more and more widely used for thermosetting plastic molding products.
Design of injection mould, should not only consider the plastic melt flow behavior and other plastic processing technical requirements problems, such as manufacturing and assembly of the die is to consider the mould structure, roughly classified into the following several aspects:
(1) to understand the plastic melt flow behavior, considering plastic throughout the runner and cavity flow resistance, flow velocity, flow check maximum length. According to the plastic flow in mould (that is, the molding order), considering the plastic in the mold to the fusion and cavity within the original air export problem.
(2) considering the cooling process of plastic shrinkage and feeding problems.
(3) through the mould design to control the plastic in the mold of crystallization, orientation and internal stress of improved products.
(4) into the pour point and parting surface selection problem.
(5) parts of horizontal parting core-pulling and ejection.
(6) the mould cooling or heating problem.
(7) all mold size and the relationship between the injection machine, including the maximum number of injection and injection machine, clamping force, the size of the mould parts, etc.
(8) mould overall structure and the shape of parts is simple and reasonable, the mould should have appropriate precision, smoothness, strength and stiffness, easy to manufacture and assembly.
Above these problems, does not exist in isolation, but influence each other, should be integrated into consideration.
Keywords: core, cavity, gate, gating system and demoulding mechanism
II