喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================
摘 要
目錄
摘要………………………………………………………………………2
緒論………………………………………………………………………3
一． 圖片及實例……………………………………………………....8
二． 技術參數…………………………………………………....…....8
三． 高效行星球磨機的幾項考核措施…………………........………9
四．高效行星球磨機特點…………………………..………..……….9
五．分析工作原理及選擇電動機………………………….………..10
1. 電動機類型的選擇……………………………….........………10
2. 確定電動機的功率………………………………………….....11
3. 確定電動機的轉速…………………………………………….13
六．主軸的結構設計………………………………………………...18
七．小軸的設計………………………………………………….…..22
八．齒輪的設計………………………………………………………27
九．下箱體的設計………………………………………….…….….31
十．大小輪槽設計……………………………………….…..………31
十一. 帶傳動設計…………………………………….....…………..32
十二. 參考文獻………………………………....………..…….…….34
十三. 致謝……………………………………………..…..………35
摘 要
球磨機是通過圓筒內的鋼球在材料之上作用來碾磨材料的，是一種能有效的碾磨多種材料的工具。其被廣泛地被用于建材、化工、選礦等行業。
球磨機的能量利用率很低，這和物料在磨內分布情況有極大的關系。越靠近筒體的外層運動軌跡，研磨作用越大。而磨機實際生產時，物料進入筒體就直接落入內層，內層的物料要經過較長時間才能進入外層充分碾磨，從而損失了大量能量。
為了使物料合理地分布，對磨機進料部分進行改進。將舊式的直角下料溜改為傾角式下料溜，使物料溜角大于休止角，物料順暢進給。合理的選取進料點，使物料直接進入筒體外層。最后通過計算和一些經驗數據，確定進料裝置的材質，物料填充率，筒體適應轉速和磨機功率等相關參數。
- 2 -
-
吉林師范大學應用工程學院學院畢業論文
Abstract
Ball mill winch grinds material by rotating a cylinder with steel grinding balls, is an efficient tool for grinding many materials into fine powder. It is widely used in building material, chemical industry, etc. A Ball Mill
The ball mill energy use factor is low, the distribution situation has the enormous relations with the material in grinding. Therefore discovered more approached the grinding machine outer layer, the abrasive action is bigger. When grinding machine actual production, the materials entered the mill to fall directly the inner layer, the process dynamics analysis, the inner layer material had to through the long time to enter the outer layer, reduced the production efficiency greatly.
In order to cause the material to be quickly even, it has made the improvement to grinding machine feeding. First the old-style right angle feeding change the inclination angle type, then slide the angle to be bigger than stops the angle, will cause the material fast smoothly to enter. Then reasonable selection feeding spot, causes the material to enter the tube body outer layer directly. Finally through the computation and empirical dates, had determined the device material, the material feeding rate, the mill the rotational speed and the grinding machine power and so on.
第3頁