溫控器墊塊點澆口注射模具的設計【一模一腔】【說明書+CAD+UG】

溫控器墊塊點澆口注射模具的設計【一模一腔】【說明書+CAD+UG】,一模一腔,說明書+CAD+UG,溫控器墊塊點澆口注射模具的設計【一模一腔】【說明書+CAD+UG】,溫控,墊塊,澆口,注射,模具,設計,說明書,仿單,cad,ug 桂林電子科技大學畢業設計（論文）外文翻譯原文 編號： 畢業設計(論文)外文翻譯 （原文） 院 （系）： 國防生學院 專 業： 機械設計制造及其自動化 學生姓名： 呂 亮 學 號： 1001120122 指導教師單位： 機電工程學院 姓 名： 楊運澤 職 稱： 講 師 2014年 3 月 9 日 第 27 頁 共 28 頁 桂林電子科技大學畢業設計（論文）外文翻譯原文 Die history Meorice Wilkes Abstract Functional parts are needed for design veri?cation testing, ?eld trials, customer evaluation, and production planning. By eliminating multiple steps, the creation of the injection mold directly by a rapid prototyping (RP) process holds the best promise of reducing the time and cost needed to mold low-volume quantities of parts. The potential of this integration of injection molding with RP has been demonstrated many times. What is missing is the fundamental understanding of how the modi?cations to the mold material and RP manufacturing process impact both the mold design and the injection molding process. In addition, numerical simulation techniques have now become helpful tools of mold designers and process engineers for traditional injection molding. But all current simulation packages for conventional injection molding are no longer applicable to this new type of injection molds, mainly because the property of the mold material changes greatly. In this paper, an integrated approach to accomplish a numerical simulation of injection molding into rapid-prototyped molds is established and a corresponding simulation system is developed. Comparisons with experimental results are employed for veri?cation, which show that the present scheme is well suited to handle RP fabricated stereolithography (SL) molds. Keywords Injection molding Numerical simulation Rapid prototyping Introduction In injection molding, the polymer melt at high temperature is injected into the mold under high pressure [1]. Thus, the mold material needs to have thermal and mechanical properties capable of withstanding the temperatures and pressures of the molding cycle. The focus of many studies has been to create the injection mold directly by a rapid prototyping (RP) process. By eliminating multiple steps, this method of tooling holds the best promise of reducing the time and cost needed to create low-volume quantities of parts in a production material. The potential of integrating injection molding with RP technologies has been demonstrated many times. The properties of RP molds are very different from those of traditional metal molds. The key differences are the properties of thermal conductivity and elastic modulus (rigidity). For example, the polymers used in RP-fabricated stereolithography (SL) molds have a thermal conductivity that is less than one thousandth that of an aluminum tool. In using RP technologies to create molds, the entire mold design and injection-molding process parameters need to be modi?ed and optimized from traditional methodologies due to the completely different tool material. However, there is still not a fundamental understanding of how the modi?cations to the mold tooling method and material impact both the mold design and the injection molding process parameters. One cannot obtain reasonable results by simply changing a few material properties in current models. Also, using traditional approaches when making actual parts may be generating sub-optimal results. So there is a dire need to study the interaction between the rapid tooling (RT) process and material and injection molding, so as to establish the mold design criteria and techniques for an RT-oriented injection molding process. In addition, computer simulation is an effective approach for predicting the quality of molded parts. Commercially available simulation packages of the traditional injection molding process have now become routine tools of the mold designer and process engineer [2]. Unfortunately, current simulation programs for conventional injection molding are no longer applicable to RP molds, because of the dramatically dissimilar tool material. For instance, in using the existing simulation software with aluminum and SL molds and comparing with experimental results, though the simulation values of part distortion are reasonable for the aluminum mold, results are unacceptable, with the error exceeding 50%. The distortion during injection molding is due to shrinkage and warpage of the plastic part, as well as the mold. For ordinarily molds, the main factor is the shrinkage and warpage of the plastic part, which is modeled accurately in current simulations. But for RP molds, the distortion of the mold has potentially more in?uence, which have been neglected in current models. For instance, [3] used a simple three-step simulation process to consider the mold distortion, which had too much deviation. In this paper, based on the above analysis, a new simulation system for RP molds is developed. The proposed system focuses on predicting part distortion, which is dominating defect in RP-molded parts. The developed simulation can be applied as an evaluation tool for RP mold design and process optimization. Our simulation system is veri?ed by an experimental example. Although many materials are available for use in RP technologies, we concentrate on using stereolithography (SL), the original RP technology, to create polymer molds. The SL process uses photopolymer and laser energy to build a part layer by layer. Using SL takes advantage of both the commercial dominance of SL in the RP industry and the subsequent expertise base that has been developed for creating accurate, high-quality parts. Until recently, SL was primarily used to create physical models for visual inspection and form-?t studies with very limited functional applications. However, the newer generation stereolithographic photopolymers have improved dimensional, mechanical and thermal properties making it possible to use them for actual functional molds. 1 Die position in industrial production Mold is a high-volume products with the shape tool, is the main process of industrial production equipment. 采用模具生產零部件，具有生產效率高、質量好、成本低、節約能源和原材料等一系列優點，用模具生產制件所具備的高精度、高復雜程度、高一致性、高生產率和低消耗，是其他加工制造方法所不能比 With mold components, with high efficiency, good quality, low cost, saving energy and raw materials and a series of advantages, with the mold workpieces possess high accuracy, high complexity, high consistency, high productivity and low consumption , other manufacturing methods can not match. 已成為當代工業生產的重要手段和工藝發展方向。 Have already become an important means of industrial production and technological development. 現代經濟的基礎工The basis of the modern industrial economy. 現代工業品的發展和技術水平的提高，很大程度上取決于模具工業的發展水平，因此模具工業對國民經濟和社會發展將起越來越大的作用。 The development of modern industrial and technological level depends largely on the level of industrial development die, so die industry to national economic and social development will play an increasing role. 1989 年 3 月國務院頒布的《關于當前產業政策要點的決定》中，把模具列為機械工業技術改造序列的第一位、生產和基本建設序列的第二位 ( 僅次于大型發電設備及相應的輸變電設備 ) ，確立模具工業在國民經濟中的重要地位。 March 1989 the State Council promulgated "on the current industrial policy decision points" in the mold as the machinery industry transformation sequence of the first, production and capital construction of the second sequence (after the large-scale power generation equipment and the corresponding power transmission equipment), establish tooling industry in an important position in the national economy. 1997 年以來，又相繼把模具及其加工技術和設備列入了《當前國家重點鼓勵發展的產業、產品和技術目錄》和《鼓勵外商投資產業目錄》。 Since 1997, they have to mold and its processing technology and equipment included in the "current national focus on encouraging the development of industries, products and technologies catalog" and "to encourage foreign investment industry directory." 經國務院批準，從 1997 年到 2000 年，對 80 多家國有專業模具廠實行增值稅返還 70% 的優惠政策，以扶植模具工業的發展。 Approved by the State Council, from 1997 to 2000, more than 80 professional mold factory owned 70% VAT refund of preferential policies to support mold industry. 所有這些，都充分體現了國務院和國家有關部門對發展模具工業的重視和支持。 All these have fully demonstrated the development of the State Council and state departments tooling industry attention and support. 目前全世界模具年產值約為 600 億美元，日、美等工業發達國家的模具工業產值已超過機床工業，從 1997 年開始，我國模具工業產值也超過了機床工業產值。 Mold around the world about the current annual output of 60 billion U.S. dollars, Japan, the United States and other industrialized countries die of industrial output value of more than machine tool industry, beginning in 1997, China's industrial output value has exceeded the mold machine tool industry output. 據統計，在家電、玩具等輕工行業，近 90 ％的零件是綜筷具生產的；在飛機、汽車、農機和無線電行業，這個比例也超過 60 ％。 According to statistics, home appliances, toys and other light industries, nearly 90% of the parts are integrated with production of chopsticks; in aircraft, automobiles, agricultural machinery and radio industries, the proportion exceeded 60%. 例如飛機制造業，某型戰斗機模具使用量超過三萬套，其中主機八千套、發動機二千套、輔機二萬套。 Such as aircraft manufacturing, the use of a certain type of fighter dies more than 30,000 units, of which the host 8000 sets, 2000 sets of engines, auxiliary 20 000 sets. 從產值看， 80 年代以來，美、日等工業發達國家模具行業的產值已超過機床行業，并又有繼續增長的趨勢。 From the output of view, since the 80's, the United States, Japan and other industrialized countries die industry output value has exceeded the machine tool industry, and there are still rising. 據國際生產技術協會預測，到 2000 年，產品盡件粗加工的 75% 、精加工的 50 ％將由模具完成；金屬、塑料、陶瓷、橡膠、建材等工業制品大部分將由模具完成， 50 ％以上的金屬板材、 80 ％以上的塑料都特通過模具轉化成制品。 Production technology, according to the International Association predicts that in 2000, the product best pieces of rough 75%, 50% will be finished mold completed; metals, plastics, ceramics, rubber, building materials and other industrial products, most of the mold will be completed in more than 50% metal plates, more than 80% of all plastic products, especially through the mold into. 2 The historical development of mold 模具的出現可以追溯到幾千年前的陶器和青銅器鑄造，但其大規模使用卻是隨著現代工業的掘起而發展起來的。 The emergence of mold can be traced back thousands of years ago, pottery and bronze foundry, but the large-scale use is with the rise of modern industry and developed. 19 世紀，隨著軍火工業 ( 槍炮的彈殼 ) 、鐘表工業、無線電工業的發展，沖模得到廣泛使用。 The 19th century, with the arms industry (gun's shell), watch industry, radio industry, dies are widely used. 二次大戰后，隨著世界經濟的飛速發展，它又成了大量生產家用電器、汽車、電子儀器、照相機、鐘表等零件的最佳方式。 After World War II, with the rapid development of world economy, it became a mass production of household appliances, automobiles, electronic equipment, cameras, watches and other parts the best way. 從世界范圍看，當時美國的沖壓技術走在前列——許多模具先進技術，如簡易模具、高效率模具、高壽命模具和沖壓自動化技術，大多起源于美國；而瑞士的精沖、德國的冷擠壓技術，蘇聯對塑性加工的研究也處于世界先進行列。 From a global perspective, when the United States in the forefront of stamping technology - many die of advanced technologies, such as simple mold, high efficiency, mold, die and stamping the high life automation, mostly originated in the United States; and Switzerland, fine blanking, cold in Germany extrusion technology, plastic processing of the Soviet Union are at the world advanced. 50 年代，模具行業工作重點是根據訂戶的要求，制作能滿足產品要求的模具。 50's, mold industry focus is based on subscriber demand, production can meet the product requirements of the mold. 模具設計多憑經驗，參考已有圖紙和感性認識，對所設計模具零件的機能缺乏真切了解。 Multi-die design rule of thumb, reference has been drawing and perceptual knowledge, on the design of mold parts of a lack of real understanding of function. 從 1955 年到 1965 年，是壓力加工的探索和開發時代——對模具主要零部件的機能和受力狀態進行了數學分橋，并把這些知識不斷應用于現場實際，使得沖壓技術在各方面有飛躍的發展。 From 1955 to 1965, is the pressure processing of exploration and development of the times - the main components of the mold and the stress state of the function of a mathematical sub-bridge, and to continue to apply to on-site practical knowledge to make stamping technology in all aspects of a leap in development. 其結果是歸納出模具設計原則，并使得壓力機械、沖壓材料、加工方法、梅具結構、模具材料、模具制造方法、自動化裝置等領域面貌一新，并向?qū)嵱没姆较蛲七M，從而使沖壓加工從儀能生產優良產品的第一階段。 The result is summarized mold design principles, and makes the pressure machine, stamping materials, processing methods, plum with a structure, mold materials, mold manufacturing method, the field of automation devices, a new look to the practical direction of advance, so that pressing processing apparatus capable of producing quality products from the first stage. 進入 70 年代向高速化、啟動化、精密化、安全化發展的第二階段。 Into the 70's to high speed, launch technology, precision, security, development of the second stage. 在這個過程中不斷涌現各種高效率、商壽命、高精度助多功能自動校具。 Continue to emerge in this process a variety of high efficiency, business life, high-precision multi-functional automatic school to help with. 其代表是多達別多個工位的級進模和十幾個工位的多工位傳遞模。 Represented by the number of working places as much as other progressive die and dozens of multi-station transfer station module. 在此基礎上又發展出既有連續沖壓工位又有多滑塊成形工位的壓力機—彎曲機。 On this basis, has developed both a continuous pressing station there are more slide forming station of the press - bending machine. 在此期間，日本站到了世界最前列——其模具加工精度進入了微米級，模具壽命，合金工具鋼制造的模具達到了幾千萬次，硬質合金鋼制造的模具達到了幾億次 p 每分鐘沖壓次數，小型壓力機通常為 200 至 300 次，最高為 1200 次至 1500 次。 In the meantime, the Japanese stand to the world's largest - the mold into the micron-level precision, die life, alloy tool steel mold has reached tens of millions of times, carbide steel mold to each of hundreds of millions of times p minutes for stamping the number of small presses usually 200 to 300, up to 1200 times to 1500 times. 在此期間，為了適應產品更新快、用期短 ( 如汽車改型、玩具翻新等 ) 的需要，各種經濟型模具，如鋅落合金模具、聚氨酯橡膠模具、鋼皮沖模等也得到了很大發展。 In the meantime, in order to meet product updates quickly, with the short duration (such as cars modified, refurbished toys, etc.) need a variety of economic-type mold, such as zinc alloy die down, polyurethane rubber mold, die steel skin, also has been very great development. 從 70 年代中期至今可以說是計算機輔助設計、輔助制造技術不斷發展的時代。 From the mid-70s so far can be said that computer-aided design, supporting the continuous development of manufacturing technology of the times. 隨著模具加工精度與復雜性不斷提高，生產周期不斷加快，模具業對設備和人員素質的要求也不斷提高。 With the precision and complexity of mold rising, accelerating the production cycle, the mold industry, the quality of equipment and personnel are required to improve. 依靠普通加工設備，憑經驗和手藝越來越不能滿足模具生產的需要。 Rely on common processing equipment, their experience and skills can not meet the needs of mold. 90 年代以來，機械技術和電子技術緊密結合，發展了 NC 機床，如數控線切割機床、數控電火花機床、數控銑床、數控坐標磨床等。 Since the 90's, mechanical and electronic technologies in close connection with the development of NC machine tools, such as CNC wire cutting machine, CNC EDM, CNC milling, CNC coordinate grinding machine and so on. 而采用電子計算機自動編程、控制的 cNc 機床提高了數控機床的使用效率和范圍。 The use of computer automatic programming, control CNC machine tools to improve the efficiency in the use and scope. 近年來又發展出由一臺計算機以分時的方式直接管理和控制一群數控機床的 nNc 系統。 In recent years, has developed a computer to time-sharing by the way a group of direct management and control of CNC machine tools NNC system. 隨著計算機技術的發展，計算機也逐步進入模具生產的各個領域，包括設計、制造、管理等。 With the development of computer technology, computers have gradually into the mold in all areas, including design, manufacturing and management. 國際生產研究協會預測，到 2000 年，作為設計和制造之間聯系手段的圖紙將失去其主要作用。 International Association for the Study of production forecasts to 2000, as a means of links between design and manufacturing drawings will lose its primary role. 模具自動設計的最根本點是必須確立模具零件標準及設計標準。 Automatic Design of die most fundamental point is to establish the mold standard and design standards. 要擺脫過去以人的思考判斷和實際經驗為中心所組成的設計方法，就必須把過去的經驗和思考方法，進行系列化、數值化、數式化，作為設計準則儲存到計算機中。 To get rid of the people of the past, and practical experience to judge the composition of the design center, we must take past experiences and ways of thinking, for series, numerical value, the number of type-based, as the design criteria to the computer store. 因為模具構成元件也干差萬別，要搞出一個能適應各種零件的設計軟件幾乎不可能。 Components are dry because of mold constitutes a million other differences, to come up with a can adapt to various parts of the design software almost impossible. 但是有些產品的零件形狀變化不大，模具結構有一定的規律，放可總結歸納，為自動設計提供軟件。 But some products do not change the shape of parts, mold structure has certain rules, can be summed up for the automatic design of software. 如日本某公司的 CDM 系統用于級進模設計與制造，其中包括零件圖形輸入、毛坯展開、條料排樣、確定模板尺寸和標準、繪制裝配圖和零件圖、輸出 NC 程序 ( 為數控加工中心和線切割編程 ) 等，所用時間由手工的 20% 、工時減少到 35 小時；從 80 年代初日本就將三維的 cad ／ cam 系統用于汽車覆蓋件模具。 If a Japanese company's CDM system for progressive die design and manufacturing, including the importation of parts of the figure, rough start, strip layout, determine the size and standard templates, assembly drawing and parts, the output NC program (for CNC machining Center and line cutting program), etc., used in 20% of the time by hand, reduce their working hours to 35 hours; from Japan in the early 80s will be three-dimensional cad / cam system for automotive panel die. 目前，在實體件的掃描輸入，圖線和數據輸入，幾何造形、顯示、繪圖、標注以及對數據的自動編程，產生效控機床控制系統的后置處理文件等方面已達到較高水平；計算機仿真 (CAE) 技術也取得了一定成果。 Currently, the physical parts scanning input, map lines and data input, geometric form, display, graphics, annotations and the data is automatically programmed, resulting in effective control machine tool control system of post-processing documents have reached a high level; computer Simulation (CAE) technology has made some achievements. 在高層次上， CAD ／ CAM ／ CAE 集成的，即數據是統一的，可以互相直接傳輸信息． At high levels, CAD / CAM / CAE integration, that data is integrated, can transmit information directly with each other. 實現網絡化。 Achieve network. 目前． Present. 國外僅有少數廠家能夠做到。 Only a few foreign manufacturers can do it. 3 我國模具工業現狀及發展趨勢 China's mold industry and its development trend 模具工業現狀 Die & Mould Industry Status 由于歷史原因形成的封閉式、“ 大 而全” 的 企業特征，我國大部分企業均設有模具車間，處于本廠的配套地位，自 70 年代末才有了模具工業化和生產專業化這個概念。 Due to historical reasons for the formation of closed, "big and complete" enterprise features, most enterprises in China are equipped with mold workshop, in factory matching status since the late 70s have a mold the concept of industrialization and specialization of production. 生產效率不高，經濟效益較差。 Production efficiency is not high, poor economic returns. 模具行業的生產小而散亂，跨行業、投資密集，專業化、商品化和技術管理水平都比較低。 Mold production industry is small and scattered, cross-industry, capital-intensive, professional, commercial and technical management level are relatively low. 據不完全統計，全國現有模具專業生產廠、產品廠配套的模具車間（分廠）近17000家，約60萬從業人員，年模具總產值達200億元人民幣。 According to incomplete statistics, there are now specialized in manufacturing mold, the product supporting mold factory workshop (factory) near 17 000, about 600 000 employees, annual output value reached 20 billion yuan mold. 但是，我國模具工業現有能力只能滿足需求量的60％左右，還不能適應國民經濟發展的需要。 However, the existing capacity of the mold and die industry can only meet the demand of 60%, still can not meet the needs of national economic development. 目前，國內需要的大型、精密、復雜和長壽命的模具還主要依靠進口。 At present, the domestic needs of large, sophisticated, complex and long life of the mold also rely mainly on imports. 據海關統計，1997年進口模具價值6.3億美元，這還不包括隨設備一起進口的模具；1997年出口模具僅為7800萬美元。 According to customs statistics, in 1997 630 million U.S. dollars worth of imports mold, not including the import of mold together with the equipment; in 1997 only 78 million U.S. dollars export mold. 目前我國模具工業的技術水平和制造能力，是我國國民經濟建設中的薄弱環節和制約經濟持續發展的瓶頸。 At present the technological level of China Die & Mould Industry and manufacturing capacity, China's national economy in the weak links and bottlenecks constraining sustainable economic development. 1、模具工業產品結構的現狀3.1 Research on the Structure of industrial products mold 按照中國模具工業協會的劃分，我國模具基本分為10大類，其中，沖壓模和塑料成型模兩大類占主要部分。 In accordance with the division of China Mould Industry Association, China mold is divided into 10 basic categories, which, stamping die and plastic molding two categories accounted for the main part. 按產值計算，目前我國沖壓模占50％左右，塑料成形模約占20％，拉絲模（工具）約占10％，而世界上發達工業國家和地區的塑料成形模比例一般占全部模具產值的40％以上。 Calculated by output, present, China accounts for about 50% die stamping, plastic molding die about 20%, Wire Drawing Die (Tool) about 10% of the world'