雙鏈刮板輸送機設計【含8張CAD圖紙】

喜歡就充值下載吧，，資源目錄下展示的全都有，，下載后全都有，dwg格式的為CAD圖紙，有疑問咨詢QQ：414951605 或1304139763 中國礦業大學2008屆畢業生畢業設計 第6頁 目 錄 1 概述……………………………………………………………………………………1 1.1 技術現狀…………………………………………………………………………1 1.2 刮板輸送機的發展前景…………………………………………………………1 2 主要部件的結構設計和要求………………………………………………………3 2.1 機頭部……………………………………………………………………………4 2.1.1 機頭架………………………………………………………………………4 2.1.2 鏈輪…………………………………………………………………………5 2.1.3 減速器………………………………………………………………………6 2.1.4 盲軸……………………………………………………………………7 2.1.5 聯軸器……………………………………………………………………7 2.1.6 電動機………………………………………………………………………8 2.2 機尾部……………………………………………………………………………4 2.3 中部槽及附屬部 ……………………………………………………………9 2.4 刮板鏈…………………………………………………………………………11 2.5 緊鏈裝置………………………………………………………………………12 2.6 推移裝置………………………………………………………………………14 2.7 錨固裝置………………………………………………………………………15 3 總體方案的確定……………………………………………………………………15 3.1 主要技術參數…………………………………………………………………16 3.2 電動機的選………………………………………………………………………16 3.2.1 運輸能力的計算……………………………………………………………17 3.3 總傳動比及傳動比的分配……………………………………………………17 3.3.1 總傳動比的確定…………………………………………………………17 3.3.2 傳動比的分配………………………………………………………………17 3.4各級傳動計算……………………………………………………………………18 3.4.1 各軸轉速計算………………………………………………………………18 3.4.2各軸功率計算………………………………………………………………18 3.4.3 各軸扭矩計算………………………………………………………………19 3.5軸的設計及強度校核…………………………………………………………37 3.5.1 高速軸Ⅰ軸的設計…………………………………………………………37 3.5.2 Ⅱ軸的設計…………………………………………………………………39 3.5.3 Ⅲ軸的設計…………………………………………………………………40 3.5.4輸出軸的設計………………………………………………………………41 4 減速器鍵、軸承的校核………………………………………………………………43 4.1 減速器鍵的校核…………………………………………………………………43 4.1.1 Ⅰ軸鍵的校核……………………………………………………………43 4.1.2 Ⅱ軸鍵的校核……………………………………………………………43 4.1.3 Ⅲ軸鍵的校核………………………………………………………………43 4.1.4 輸出軸鍵的校核……………………………………………………………44 4.2 減速器軸承的校核………………………………………………………………44 4.2.1 驗算Ⅰ軸軸承壽命…………………………………………………………44 4.2.2 驗算Ⅱ軸軸承壽命…………………………………………………………45 4.2.3 驗算Ⅲ軸軸承壽命…………………………………………………………46 4.2.4 驗算輸出軸軸承壽命………………………………………………………46 5 箱體及附件的設計校核……………………………………………………………48 5.1軸的強度校核……………………………………………………………………49 5.1.1軸的受力分析………………………………………………………………49 5.2齒輪詳細參數……………………………………………………………………55 6 液力耦合器概述……………………………………………………………………56 結論……………………………………………………………………………………58 附錄………………………………………………………………………………59 參考文獻………………………………………………………………………………61 英語翻譯………………………………………………………………………………62 1英文原文……………………………………………………………………………62 2中文譯文……………………………………………………………………………71 致謝……………………………………………………………………………………78 摘 要 刮板輸送機是一種撓性牽引的連續輸送機械，是為采煤工作面和采區巷道運煤布置的機械。它的牽引機構是刮板鏈，承載裝置是中部槽，刮板鏈安裝在中部槽的槽面。中部槽沿運輸路線全線鋪設，刮板鏈繞經機頭、機尾的鏈輪接成封閉形置于中部槽中，與滾筒采煤機和輸送機推移裝置配套，實現落煤、裝煤、運煤及推移輸送機械化。沿輸送機全長都可向溜槽中裝煤，裝入中部槽中的煤被刮板鏈拖拉，在中部槽內滑行到卸載端卸下。 一般的刮板輸送機能在25°以下的條件使用。刮板輸送機在使用中要受拉、壓、彎曲、沖擊摩擦和腐蝕等多種作用，因此，必須有足夠的強度、剛度、耐磨和耐腐蝕性。由于它的運輸方式是物料和刮板鏈都在槽內滑行，因此運行阻力和磨損都很大。但是，在采煤工作面運煤，目前還沒有更好的機械可代替，只能從結構上、強度上和制造工藝上不斷研究，使它更加完善、耐用。 刮板輸送機是與大型綜采工作面設備配套使用的液壓支架、采煤機，完成把工作面采煤機采下的煤輸送、轉運到后續運輸設備上的任務，并提供相應的連接手段。設計要求與ZY2300轉載機自移機尾配套，以實現在2.3米范圍內整體移動而不必拆移輸送機。與ZY2300轉載機自移機尾配合可更方便地調節皮帶機，增強了輸送機與轉載機配合的協調性。本刮板輸送機與MG300/700-WD采煤機配套使用，運量可達1000t/h，技術先進，工作可靠，是大型綜采配套設備的優秀機型。 關鍵詞：刮板輸送機 ；減速器 ；機頭部 ；機尾部 ；液力耦合器。 Scraper conveyor Scraper conveyor is a reprint of fully coal face ancillary equipment in the transport system an important part of the roadway in the face of the accepted face scraper conveyor unloading of coal flow, not halt the transfer to the retractable belt Conveyor boost. Bridge reversed loader with the face-scraper conveyor machine synchronous over his head, face Shearer guarantee for coal mining, and fully mechanized coal face of high yield and high efficiency operations. Scraper conveyor is a reprint of a special structure of the scraper conveyor, powertrain and drive and scraper conveyor similar to a ramp of its fuselage and a section of the arch bridge structure and belt conveyors in the tail Paragraph above lap. In the back-alley in the coal face when the machine goes to reprint its arch bridge and all of the aircraft ended the lap belt conveyor stack of position limits, a retractable belt conveyor shortened ride Next length of the belt conveyor for the development of the shift to home-unloading nose reproduced below, can be reproduced with the face of the advance goes forward. Reproduced large-scale machine is fully coal face with the equipment supporting the use of the Gate transmission, reproduced equipment, to complete the face conveyor sent to the coal transportation, transit facilities to follow up on the conveyor belt of tasks and to provide the appropriate means of connection. ZY2300 belt with the design requirements for supporting the tail since the shift to achieve in the 2.3 metres of the overall mobile rather than demolished shift belt machine. ZY2300 belt and the tail of the shift can be more easily cope with belt-regulation, enhance the belt-and-reproduced with the coordination. This reprint of MG300/700-WD and supporting the use of conveyor, capacity up to 1,000 tons / hour, technologically advanced, reliable, large-scale comprehensive mining equipment supporting the excellent models. Key words：scraper conveyor； reducer； machine head； aircraft tail； hydraulic coupler。