單吸渣漿泵設計及機械密封設計【含4張CAD圖紙】
單吸渣漿泵設計及機械密封設計【含4張CAD圖紙】,含4張CAD圖紙,單吸渣漿泵,設計,機械,密封,CAD,圖紙
附錄：外文資料翻譯
火電廠泵的脫硫分析
我國目前的酸雨區已跨越幅員的三分之一，2005年的S排放量到達2549萬t，跨越總量節制指標749萬t，加重了我國的大氣污染火電廠是S的主要排放源，我國2004年1月1日實行的GBl3223-2003《火電廠大氣污染排放規范》按時段劃定了火電廠的大氣污染物最高允許排放值，提速了我國火電廠脫硫裝置的投入使用，對單機容軸向柱塞泵量跨越20MW的大型燃煤火電機組，海內外目前風行的脫硫工藝是接納濕法脫硫，在完成脫硫要求的同時，可以同時孕育發生副產品石膏，實現脫硫副產品的資源再哄騙，我國此刻運行的很多火電廠在原設計中沒有考慮脫硫裝置的安裝位置，這使運行的火電廠增加脫硫裝置帶來了堅苦，將來10年裝機容量3×10MW的火電機組均需要安裝脫硫'>煙氣脫硫裝置，是以，我國此刻運行的火電廠迫切需要一種既具備高脫硫效率且節省占地面積的濕法脫硫新工藝，母公司為德國魯爾集團公司(Ruhr AG)的德國斯特雅便拆立式管道離心泵克集團公司(steag AG)自1969年起頭開發以CaO或CaCO為脫硫劑的緊湊密切式濕法脫硫新工藝，該工藝具備脫硫效率高、占地面積小的獨特優點，1977年在德國wilhelmshaven第一套具備貿易化使用價值的緊湊密切式濕法脫硫工業化測試設備對5×10Nm/h的燃煤電廠煙氣進行脫硫，相應的汽輪發電機組的電功率為140 MW；1982年第一臺工藝脫硫設備在該電廠投入運行，脫硫的煙宇量為1.5×10Nm/h，相應的汽輪發電機組的電功率為450 MW，該工藝到2000年已成功應用的火電機組容量跨越2×10MW，單臺鍋爐的最大額定煙氣流量為2.29×10Nm/h，單臺汽輪發電機組的最大額定電功率為750MW，緊湊多級管道泵密切式濕法脫硫工藝出格適用于已運行電廠增加脫硫裝置的改造方案，對我國大批火電廠的增加脫硫裝置的改造方案具備重要的實用價值。
1、燃煤火電廠各種泵的脫硫工藝
緊湊密切式濕法脫硫工藝的流程圖，來自電除塵器⑴溫度為120～130％的待脫硫的煙氣進入回轉式煙氣加熱器⑵，把熱量放給來自脫硫塔⑷溫度為40～45℃的凈化煙氣，凈化后的煙氣是經過立式風機⑶使其壓力升高來降服回轉式煙氣加熱器的流動阻力，凈化后的煙氣溫度升高到80～90％后排人煙囪，以到達煙氣進入煙囪的溫氟塑料自吸泵度要求，放熱后的煙氣從脫硫塔底部進入脫硫塔向上流動，在脫硫塔內待脫硫的煙氣與來自脫硫塔底部經泵(6)，升壓后從漫衍在脫硫塔上部的噴嘴兒⑸噴出的脫硫劑漿液進行混淆發生化學反映到達脫硫目的，化學反映產物從脫硫塔上部流向脫硫塔下部，與經風機⑻送人脫硫塔的空氣進一步進行化學反映，形成脫硫'>煙氣脫硫的副產品石膏的漿液，石膏漿液進入經漿泵⑼送人分離器(10)，分離出來的濃石膏漿液進入石膏出產體系⑾，孕育發生石膏產品，從石膏出產體系⑾分離出來的廢液與分離器潛水排污泵(10)分離出來的廢液進入混淆器(12)，流出混淆器(12)的漿液分成3部門，一部門進入脫硫劑制漿體系(16)，另外一部門進入脫硫塔再循環哄騙，還有一部門經漿泵⒀升壓后送人分離器⒁，分離出來的廢水送入廢水處理體系(15)進行凈化處理，漿泵(7)將漿液升壓后在脫硫塔下部進行攪拌，防止脫硫塔下部漿液沉淀，脫硫所需的工藝用水經抽水機送入脫硫塔，隨著脫硫劑的不停補充，就能夠使脫硫體系連續運行，完成對煙氣的連續脫硫。
2泵的脫硫工藝的應用實例
緊湊密切式濕法脫硫工藝與自吸式無堵塞排污泵常見的濕法脫硫工藝相比，主要差別是脫硫凈化后的煙氣經立式風機升壓后送入回轉式煙氣加熱器升溫，然后再送人煙囪排入大氣中。
緊湊密切式濕法脫硫工藝已在德國、荷蘭、土耳其、印尼、意大利、西班牙、巴西等十幾個國家得到推廣和應用，脫硫劑別離可以接納CaO、CaO/CaC03、海水，電廠的汽油可所以煙煤、褐煤、石油焦等，持久現實運行的脫硫效率從早期的90％到達目前的95％以上，最高可達98.5％，列出了緊湊密切式濕法脫硫工藝的部門實例。
德國對電廠排放要求十分嚴酷，燃煤火電廠煙氣的排放限定值S為400 mg/Nm脫硫手動泵效率要大于85％，NO為200 mg/Nm，煙塵50mg/Nm，這使電力出產中為環保支出的成本十分可觀，在德國燃煤火力發電廠電力成本的構成中：汽油成本65％、濕法脫硫及出產石膏15％、脫氮成本9％、除塵成本5％、噪音治理2％、水費3％、廠區生活習性維護用度1％，德國燃煤電廠現實的煙氣排放值優于排放限定值，某電廠脫硫'>煙氣脫硫的現實運行記載繪出的煙氣SO，出口含量和現實運行的脫硫效率，圖中表白，脫硫前煙氣中的SO濃度約為11000 mg/Nm，脫硫后煙氣中的SO濃度約為33mg/Nm，脫硫效率為99.7％緊湊密切式濕法脫硫過程孕育發生的石膏產量可由下式計較。
3、緊湊密切式機油泵濕法脫硫工藝應用過程當中的改進措施
在緊湊密切式濕法脫硫工藝的實用過程當中，為了進一步提高該脫硫工藝的安全性、經濟性和靠得住性，主要進行了如下幾個方面的技能改進：
3、1提高設備運行的靠得住性
接納耐磨材料和螺旋型大口徑噴嘴兒，解決了噴嘴兒的擁塞和磨耗問題，不僅提高了噴嘴兒的耐磨機能和漿液流場的均勻性，而且使噴嘴兒的壓差由改進前的0.20 MP下降到0.08 MP，實現了噴嘴兒節能跨越30％。
脫硫塔內部接納橡膠內襯結構，不僅節省了鋼材，而且提高了脫硫塔的耐腐化機能汽動泵，從而也提高了脫硫塔的使用生存的年限和運行靠得住性。
3、2削減脫硫裝置的占地面積和初投資
接納立式風機給進入煙氣加熱器的凈化煙氣升壓，節省了緊湊密切式脫硫裝置的安裝尺寸，省電了煙氣管道的長度，不僅可以大幅度降低煙氣的流動阻力，而且省電了該脫硫工藝的占地面積和降低了該脫硫工藝的初投資，易于在已運行的燃煤機組上接納此脫硫工藝，如單機容量400 MW燃煤機組的脫硫塔的直徑為12.5m，回轉式煙氣加熱器的直徑為10m。
3、3優化脫硫工藝的運行方式和參量
為了改善凈化后手動泵的煙氣中液體顆粒的分離效果，使氣液分離器接納瓦壟板折返結構，在增加氣液分離面積和增加氣液分離流程的同時，降低了分離器的高度，從而也到達了降低脫硫塔高度的效果。
在脫硫塔底部接納漿液循環攪拌措施，使脫硫塔底部的漿液的濃度變得十分均勻，提高了脫硫塔底部的容積有用哄騙率，從而降低了脫硫塔的高度，如930MW燃煤機組的鍋爐高度為175m，而緊湊密切式脫硫塔的高度為48m。
將脫硫塔內的噴嘴兒層設為6層，每?jī)蓪訃娮靸河靡慌_(tái)漿泵供給噴嘴兒漿液，使噴嘴兒的流量可以調潛水軸流泵節，從而包管不同煙氣SO濃度時均能到達較高的脫硫效率，以加強該脫硫工藝對汽油的適應性。
經過上面所說的改進措施的實行，使緊湊密切式濕法脫硫工藝具備改造用度低、節省占地面積、體系的安全性、經濟性和靠得住性都很高的一種新的濕法脫硫工藝，得到廣泛推廣和應用，成為運行中的大型燃煤電廠脫硫改造的首選新工藝。
4、竣事語
緊湊密切式濕法脫硫工藝現實持久運行的脫硫效率此刻已超高95％，最高已到達98，5％，脫硫效率可以饜足燃煤電廠脫硫效率的要求；
緊湊密切式濕法脫硫無油隔膜真空泵工藝孕育發生的脫硫石膏產品的質量和石膏中微量元素的含量，完全可以饜足市場對石膏產品的質量要求，實現了脫硫副產品的資源化再哄騙；
經過改進的緊湊密切式濕法脫硫工藝具備改造用度低、節省占地面積、體系的安全性、經濟性和靠得住性高等獨特優點，是已運行的大型燃煤電廠脫硫改造的首選新工藝。
外文原文：
Coal-fired pump plant technology of compact
Acid rain areas in China have more than one-third of the land area in 2005, emissions of S to reach 25.49 million t, the total control of more than 7,490,000 t, exacerbated by air pollution in China's thermal power plant is the main source S, China's January 1, 2004 implementation GBl3223-2003 "thermal power plant air pollution emission standards," according to periods of thermal power plant provides the maximum allowable emissions of air pollutants the value of thermal power plants in China to speed up the desulfurization devices put into use, the stand-alone capacity more than 20MW of large-scale coal-fired thermal power units, both at home and abroad is currently popular is the use of wet FGD desulphurization, desulfurization requirements completed at the same time, it will also produce a by-product gypsum, FGD by-product of the realization of re-use of resources, China is now running a number of thermal power plants In the original design did not consider the installation of desulfurization equipment, which makes the operation of thermal power plant desulfurization devices to increase the difficulties brought about by the next 10 years the 3 × 10MW installed capacity of thermal power units are required to install desulfurization '> flue gas desulfurization devices, therefore, Our country is now in urgent need of running a thermal power plant not only has the high desulfurization efficiency and save the new area of the wet FGD process, the parent group for Germany's Ruhr (Ruhr AG) of Germany Group (steag AG) since R & D in 1969 for CaO or CaCO compact Desulfurizer WFGD new technology, the desulfurization process with high efficiency and small footprint of the unique advantages of wilhelmshaven in Germany in 1977 the first set of commercial value of the compact WFGD type of industrial test equipment 5 × 10Nm / h for coal-fired power plant flue gas desulfurization, the corresponding turbine-generator unit for the electric power 140 MW; 1982 in the first Taiwan-process desulfurization equipment in the plant put into operation, flue gas
desulfurization capacity of 1.5 × 10Nm / h, corresponding turbine-generator unit for the electric power 450 MW, the process that has been successfully applied in 2000 the thermal power unit capacity of more than 2 × 10MW, the largest single boiler flue gas flow rated 2.29 × 10Nm / h, a single turbine-generator unit of the largest electric power for the rated 750MW, compact wet FGD process has been in operation is especially suitable for power plant desulfurization equipment to increase the transformation program, a large number of our thermal power plant desulfurization devices an increase in the transformation of program has an important practical value.
1 coal-fired thermal power plant technology of compact WFGD
Compact wet FGD process flow chart as shown in Figure 1, from electrostatic precipitator ⑴ temperature of 120 ~ 130% of the flue gas desulfurization to be turning into the flue gas heater ⑵, the heat released to the from the desulfurization tower ⑷ temperature of 40 ~ 45 ℃ flue gas purification, after purification of the flue gas is the result of vertical fan ⑶ to overcome the increased pressure to turn the flow of flue gas heater resistance, purified flue gas temperature to 80 ~ 90% of people behind the chimney (17), in order to achieve the temperature of flue gas entering the chimney request, after the heat from the flue gas desulfurization tower at the bottom of upward mobility into the desulfurization tower, to be in the desulfurization tower Desulfurization of flue gas desulfurization tower from the bottom by the pump (6), step-up from the desulfurization tower located in the upper part of the nozzle ⑸ out of the mixed slurry desulfurizer chemical reaction to achieve the purpose of desulfurization, chemical reaction products from the desulfurization Tap the bottom of the upper part of the flow of desulfurization tower, with the fan ⑻ give the air desulfurizer further chemical reaction, the formation of desulfurization '> FGD gypsum by-product of the slurry, gypsum slurry into the pump through ⑼ give separator (10), separated into the dense slurry gypsum plaster production systems ⑾, resulting in gypsum products, gypsum production system from ⑾ separated from the liquid and the separator (10) separated from the liquid into the mixer (12 ), outflow mixer (12) of the slurry into 3 parts into the system desulfurizer Pulp (16), another part of recycling into the desulfurization tower, some by the pump ⒀ give separator after boost ⒁, separated from the wastewater into the wastewater treatment system (15) for purification, pump (7) after the slurry desulfurizer boost to stir the bottom, to prevent the lower part of serous desulfurizer precipitation, water desulfurization process required by the pump into the desulfurization tower, with the constant desulfurizer added that allow continuous operation of desulfurization systems, to complete a continuous flue gas desulfurization.
2, compact WFGD '> FGD application process
Compact wet FGD process with common wet FGD process, the main difference is the desulfurization of flue gas purification by following the step-up into the vertical rotary fan flue gas heater to heat up, and then send the person into the air chimney in.
Compact wet FGD process has been in Germany, the Netherlands, Turkey, Indonesia, Italy, Spain, Brazil and other countries has been the promotion and application, respectively, can be used desulfurizer CaO, CaO/CaC03, water, fuel for power plants can be bituminous coal, lignite, petroleum coke, etc., long-term operation of the desulfurization efficiency of 90% from early to reach more than 95% of the current up to 98.5%, are listed in the compact part of wet FGD process instance.
Germany has very strict requirements of power plant emissions, coal-fired thermal power plant flue gas emission limit value of S for the 400 mg / Nm desulfurization efficiency is greater than 85%, NO for the 200 mg / Nm, dust 50mg/Nm, which makes power production the cost of expenditures for environmental protection is very impressive, in Germany the cost of electricity coal-fired power plants in the composition: 65% of fuel costs, the production of gypsum wet FGD and 15%, 9% of the cost of removal, the cost of 5% of dust, noise control 2% , 3 percent water, plant maintenance costs 1% of the ecological, the German coal-fired power plant flue gas emissions from the actual value than the emission limit values, a power plant desulfurization '> FGD drawn record of the actual operation of the flue gas SO, export content and practical operation of the desulfurization efficiency, the figure shows that before the flue gas desulfurization of SO concentration is about 11000 mg / Nm, after the desulfurization of flue gas concentration of SO of about 33mg/Nm, desulfurization efficiency of 99.7 percent of compact wet FGD gypsum produced by the process of production can be calculated.
3, compact wet FGD process applications in the process of improvement measures
In the compact utility wet FGD process, in order to further enhance the desulfurization process of the security, economy and reliability, mainly the following aspects of the technical improvements:
3,1 to improve the reliability of equipment
Wear-resistant materials and the use of large diameter spiral nozzles, nozzle solve the problem of congestion and wear and tear, not only improve the wear resistance and serous nozzle flow field uniformity, but also pressure from the nozzle to improve the pre-fell to 0.20 MP 0.08 MP, achieved more than 30% energy-saving nozzles.
Desulfurizer internal structure of the use of rubber-lined, steel not only saves, but also enhanced the desulfurization tower corrosion resistance, and thus improve the life of the desulfurization tower and operating reliability.
3,2 desulfurization equipment to reduce the footprint and the initial investment
The use of vertical flue gas fan heater to enter the flue gas purification step, saving compact size of the installation of desulfurization equipment, saving the length of the gas pipeline, not only can greatly reduce the flow of flue gas resistance, and to save the Desulfurization of the area and reduce the initial investment in desulfurization technology for the coal-fired units have been in operation for the use of this desulfurization process, such as stand-alone capacity of 400 MW coal-fired units in the desulfurization tower diameter of 12.5m, rotary the diameter of gas-gas heater 10m.
Optimization of 3,3-FGD operation mode and parameters
In order to improve the purification of the flue gas after the separation of liquid particles, so that the use of gas-liquid separator returned to the structure of corrugated board, after an increase in size and increase in gas-liquid separation processes, gas-liquid separator at the same time, reduce the height of the separator, which also reached to reduce the effect of a high degree of desulfurization tower.
Used in the desulfurization tower at the bottom of the cycle slurry mixing measures to desulfurizer the concentration of slurry at the bottom become very uniform, increased volume at the bottom desulfurizer effective utilization, thereby reducing the height of the desulfurization tower, such as coal-fired units of 930MW Boiler height for the 175m, while the compact desulfurization tower height of 48m.
Desulfurization tower will set the nozzle layer 6 layers, each with a two-tier nozzle pump slurry supply nozzle so that the flow of the nozzle can be adjusted to ensure that flue gas SO different concentration can reach the high desulfurization efficiency, in order to enhance the desulfurization process of adaptation of fuel.
After the above-mentioned measures to improve implementation of the compact wet FGD process with a modified low-cost, save area, the system's security, economy and reliability are very high, a new wet FGD process has been widely and applications, to become in the operation of the transformation of large-scale coal-fired power plant of choice for a new desulfurization process.
4, concluding remarks
Compact actual wet desulfurization process of long-term operation of ultra-high desulfurization efficiency of 95 percent now, the maximum has reached 98,5%, the efficiency of desulfurization desulfurization efficiency coal-fired power plants to meet the requirements;
Compact Wet FGD gypsum produced by the quality and content of trace elements in gypsum, plaster fully meet the market requirements of product quality to achieve desulfurization by-product of re-use of resources;
Compact improved wet FGD process with a modified low-cost, save area, the system's security, economy and the unique advantages of high reliability is already running a large-scale coal-fired power plant desulfurization new technology of choice for transformation.
7
收藏