喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:1064457796 或 1304139763】
==============================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:1064457796 或 1304139763】
==============================================
編號
無錫太湖學院
畢業設計（論文）
相關資料
題目： FMS自動化立體倉庫
堆垛起重機機械結構設計
信機 系 機械工程及自動化專業
學 號： 09230102
學生姓名： 趙 磊
指導教師： 尤麗華 （職稱：副教授 ）
2013年5月25日
目 錄
一、畢業設計（論文）開題報告
二、畢業設計（論文）外文資料翻譯及原文
三、學生“畢業論文（論文）計劃、進度、檢查及落實表”
四、實習鑒定表
無錫太湖學院
畢業設計（論文）
開題報告
題目： FMS自動化立體倉庫
堆垛起重機機械結構設計
信機 系 數 控 專業
學 號： 00923102
學生姓名： 趙 磊
指導教師： 尤麗華 （職稱：教授 ）
2012年11月28日
課題來源
本課題來源于工程生產實際，應教學要求，使我們在學習期間接觸到一些先進的技術裝備和控制技術等重要知識，配合有關課程開設“柔性制造系統綜合實驗”的需求，培養獨立進行科學研究、綜合分析思考以及實際動手的能力，此畢業設計由此設立。
科學依據
目前自動化倉庫在發達國家已相當普遍，日本是自動化倉庫發展最快，建造數量最多的國家，此外美國、德國、瑞士、意大利、英國、和法國等國家也建造了許多自動化倉庫，發展至今，自動化倉庫在設計、制造自動化控制盒計算機管理方面的技術也日趨成熟。
50年代初，美國美國出現了采用橋式堆垛起重機的立體倉庫。60年代初，出現了司機操作的香道式堆垛起重機立體倉庫。1963年美國率先在立體倉庫中采用計算機控制技術，建立了世界上第一座計算機控制的立體倉庫。進入80年代，我國對老式倉庫進行技術改造，開始采用自動化立體倉庫。1980年由北京機械工業自動化研究所等單位研制建成我國第一座自動化立體倉庫，在北京汽車制造廠投產。
據不完全統計，目前我國已建成立體倉庫已有300座左右，其中全自動的立體倉庫有50多座，其中高度在12米以上的大型立體倉庫有8座，主要集中在傳統優勢行業。在此基礎上我國對倉庫的研究也向著智能化的方向發展，但是目前還處于自動化倉儲的推廣和應用階段。
研究內容
1.完成FMS自動化立體倉庫堆垛起重機機械結構設計的總體設計；
2.完成機架、行走機構、提升機構和載貨臺、貨叉等關鍵部件設計；
3.繪制相應的二維總裝圖及主要零部件圖紙；
4.設計工作量要求：至少完成A0圖紙2張和一份40頁以上的畢業論文；
5.查閱相關外文資料并完成不少于8000字符的外文資料翻譯；
6.完成一份畢業設計實習報告。
擬采取的研究方法、技術路線、實驗方案及可行性分析
本文從實際問題出發，以現有設備為依托，先確定出堆垛機的總體結構及各部分的結構草圖，然后運用理論力學、材料力學、機械設計、制造技術等專業知識，并查閱相關設計手冊，對其機械部分進行了詳細的設計計算，包括：機架、行走機構、提升機構、載貨臺和貨叉伸縮機構等。設計過程中，以實現堆垛機的機械性能為目的，在滿足其強度、剛度、運行穩定性等要求的前提下，綜合考慮結構的合理性和所選材料的經濟性，力求達到高質量、低成本。
可行性分析：由此可見，該設計方案切實可行。
研究計劃及預期成果
研究計劃：大致分為如下幾個階段。第一階段，熟悉老師提供的設計資料，設計參數等，仔細閱讀任務書，理清設計思路，搜集資料了解研究目標，構思設計方案。第二階段，進行方案實施，根據設計參數進行計算，按設計要求進行設計使之滿足生產實際，完成設計。第三階段，制定檢測方案及檢測方法從而進行校核，改善不滿足要求的設計,最后完成圖紙。
預期成果： 巷道堆垛起重機滿足所給自動化立體倉庫中各項要求,如:在規定貨架上自由提取，存放貨物以及完成與輸送系統的配合，速度控制嚴格滿足穩定性的要求等。實現最優化設計。
特色或創新之處
國內外其它行業采用自動化倉庫的情況已經充分證明，使用自動化立體倉庫能夠產生巨大的社會效益和經濟效益。這些效益主要表現在以下幾個方面：
1.搞層貨架存儲 由于使用高層貨架，存儲區可以大幅度地向空間發展，充分利用倉庫地面和空間，因此節省了庫存占地面積，提高了空間利用率。
2.自動存取 自動化立體倉庫使用機械和自動化設備，運行和處理速度快，提高了作業效率。
3.計算機控制與管理 計算機能夠準確無誤地對倉庫的各種信息進行存儲和管理，降低了操作人員的勞動強度，從而提高倉庫的管理水平。
4.作業效率明顯提高 能充分保證“先進先出”的合理作業原則。由于計算機管理、自動作業，可以方便地實施貨位和賬目的科學管理，改善庫存結構，避免盲目壓貨，并改善勞動環境。
5.節約費用 隨著經濟的高速的發展，我國有關行業開始重視立體庫的研究，對于促進傳統觀念的轉變、提高現代化物流意識，形成新型的商品流通產業等方面均產生了強勁的推動作用。
已具備的條件和尚需解決的問題
已具備的條件：設計過程中所需要的幾種軟件、相關搜集資料的網站。
尚需解決的問題：相關文獻資料的缺乏，對一些結構設計部分的具體設計指導，以及三維軟件的高級運用技巧。
指導教師意見
指導教師（簽名）： 年 月 日
系主任（簽名）： 年 月 日
英文原文：
Realization of Neural Network Inverse System with PLC in Variable Frequency Speed-Regulating System
Abstract. The variable frequency speed-regulating system which consists of an induction motor and a general inverter, and controlled by PLC is widely used in industrial field. .However, for the multivariable, nonlinear and strongly coupled induction motor, the control performance is not good enough to meet the needs of speed-regulating. The mathematic model of the variable frequency speed-regulating system in vector control mode is presented and its reversibility has been proved. By constructing a neural network inverse system and combining it with the variable frequency speed-regulating system, a pseudo-linear system is completed, and then a linear close-loop is designed to get high performance. Using PLC, a neural network inverse system can be realized in system. The results of experiments have shown that the performances of variable frequency speed-regulating system can be improved greatly and the practicability of neural network inverse control was testified.
1.Introduction
In recent years, with power electronic technology, microelectronic technology and modern control theory infiltrating into AC electric driving system, inverters have been widely used in speed-regulating of AC motor. The variable frequency speed-regulating system which consists of an induction motor and a general inverter is used to take the place of DC speed-regulating system. Because of terrible environment and severe disturbance in industrial field, the choice of controller is an important problem. In reference [1][2][3], Neural network inverse control was realized by using industrial control computer and several data acquisition cards. The advantages of industrial control computer are high computation speed, great memory capacity and good compatibility with other software etc. But industrial control computer also has some disadvantages in industrial application such as instability and fallibility and worse communication ability. PLC control system is special designed for industrial environment application, and its stability and reliability are good. PLC control system can be easily integrated into field bus control system with the high ability of communication configuration, so it is wildly used in recent years, and deeply welcomed. Since the system composed of normal inverter and induction motor is a complicated nonlinear system, traditional PID control strategy could not meet the requirement for further control. Therefore, how to enhance control performance of this system is very urgent.
The neural network inverse system [4][5] is a novel control method in recent years. The basic idea is that: for a given system, an inverse system of the original system is created by a dynamic neural network, and the combination system of inverse and object is transformed into a kind of decoupling standardized system with linear relationship. Subsequently, a linear close-loop regulator can be designed to achieve high control performance. The advantage of this method is easily to be realized in engineering. The linearization and decoupling control of normal
system can realize using this method.
Combining the neural network inverse into PLC can easily make up the insufficiency of solving the problems of nonlinear and coupling in PLC control system. This combination can promote the application of neural network inverse into practice to achieve its full economic .
In this paper, firstly the neural network inverse system method is introduced, and mathematic model of the variable frequency speed-regulating system in vector control mode is presented. Then a reversible analysis of the system is performed, and the methods and steps are given in constructing NN-inverse system with PLC control system. Finally, the method is verified in
traditional PI control and NN-inverse control.
2.Neural Network Inverse System Control Method
The basic idea of inverse control method [6] is that: for a given system, anα-th integral inverse system of the original system is created by feedback method, and combining the inverse system with original system, a kind of decoupling standardized system with linear relationship is obtained, which is named as a pseudo linear system as shown in Fig.1. Subsequently, a linear close-loop regulator will be designed to achieve high control performance.
Inverse system control method with the features of direct, simple and easy to understand does not like differential geometry method [7], which is discusses the problems in "geometry domain". The main problem is the acquisition of the inverse model in the applications. Since non-linear system is a complex system, and desired strict inverse is very difficult to
obtain, even impossible. The engineering application of inverse system control don’t meet the expectations. As neural network has non-linear approximate ability, especially for nonlinear
the powerful tool to solve the problem.
a ? th NN inverse system integrated inverse system with non-linear ability of the neural network can avoid the troubles of inverse system method. Then it is possible to apply inverse control method to a complicated non-linear system. a ? th NN inverse system method needs less system information such as the relative order of system, and it is easy to obtain the inverse model by neural network training. Cascading the NN inverse system with the original system, a pseudo-linear system is completed. Subsequently, a linear close-loop regulator will be designed.
3. Mathematic Model of Induction Motor Variable Frequency
Speed-Regulating System and Its Reversibility
Induction motor variable frequency speed-regulating system supplied by the inverter of tracking current SPWM can be expressed by 5th order nonlinear model in d-q two-phase rotating coordinate. The model was simplified as a 3-order nonlinear model. If the delay of inverter is neglected,
the model is expressed as follows:
(1)
where denotes synchronous angle frequency, and is rotate speed. are stator’s current, and are rotor’s flux linkage in
(d,q)axis. is number of poles. is mutual inductance, and is rotor’s inductance. J is moment of inertia.is rotor’s time constant, and
is load torque.
In vector mode, then
Substituted it into formula (1), then
(2)
Taking reversibility analyses of forum (2), then
The state variables are chosen as follows
Input variables are
Taking the derivative on output in formula(4), then
(5)
(6)
Then the Jacobi matrix is Realization of Neural Network Inverse System with PLC
(7)
(8)
As so and system is reversible. Relative-order of system is
When the inverter is running in vector mode, the variability of flux linkage can be neglected (considering the flux linkage to be invariableness and equal to the rating). The original system was simplified as an input and an output system concluded by forum (2).
According to implicit function ontology theorem, inverse system of formula (3)
can be expressed as
(9)
When the inverse system is connected to the original system in series, the pseudo linear compound system can be built as the type of
4. Realization Steps of Neural Network Inverse System
4.1 Acquisition of the Input and Output Training Samples
Training samples are extremely important in the reconstruction of neural network inverse system. It is not only need to obtain the dynamic data of the original system, but also need to obtain the static date. Reference signal should include all the work region of original system, which can be ensure the approximate ability. Firstly the step of actuating signal is given corresponding every 10 HZ form 0HZ to 50HZ, and the responses of open loop are obtain. Secondly a random tangle signal is input, which is a random signal cascading on the step of actuating signal every 10 seconds, and the close loop responses is obtained. Based on these inputs, 1600 groups
training samples are gotten.
4.2 The Construction of Neural Network
A static neural network and a dynamic neural network composed of integral is used to construct the inverse system. The structure of static neural network is 2 neurons in input layer, 3 neurons in output layer, and 12 neurons in hidden layer. The excitation function of hidden neuron is monotonic smooth hyperbolic tangent function. The output layer is composed of neuron with linear threshold excitation function. The training datum are the corresponding speed of open-loop, close-loop, first order
derivative of these speed, and setting reference speed. After 50 times training, the training error of neural network achieves to 0.001. The weight and threshold of the neural network are saved. The inverse model of original
system is obtained.
5 .Experiments and Results
5.1 Hardware of the System
The hardware of the experiment system is shown in Fig 5. The hardware system includes upper computer installed with Supervisory & Control configuration software WinCC6.0 [8], and S7-300 PLC of SIEMENS, inverter, induction motor and photoelectric coder.
PLC controller chooses S7-315-2DP, which has a PROFIBUS-DP interface and a MPI
is connected with S7-300 by CP5611 using MPI protocol.
The type of inverter is MMV of SIEMENS. It can communicate with SIEMENS PLC by
inverter in this system.
5.2 Software Program
5.2.1 Communication Introduction
MPI (Mu Point Interface) is a simple and inexpensive communication strategy using in slowly and non-large data transforming field. The data transforming between and PLC is not large,
chosen.
The MMV inverter is connected to the PROFIBUS network as a slave station, which is mounted with CB15 PROFIBUS module. PPO1 or PPO3 data type can be chosen. It permits to send the control data directly to the inverter addresses, or to use the system function blocks of
SFC14/15.
OPC can efficiently provide data integral and intercommunication. Different type servers and clients can access data sources of each other. Comparing with the traditional mode of software and hardware development, equipment manufacturers only need to develop one driver. This can short the development cycle, save manpower resources, and simplify the structure
of the entire control system.
Variety data of the system is needed in the neural network training of , which can not obtain by reading from PLC or directly. So OPC technology can be used l to obtain the needed data between . Setting as OPC DA server, an OPC client is constructed in Excel by VBA. System real time data is and to Excel by, and then the data in Excel is transform to for offline
training to get the inverse system of original system.
5.2.2 Control Program
Used STL to program the communication and data acquisition and control algorithm subroutine in STEP7 V5.2, velocity sample subroutine and storage subroutine are programmed in regularly interrupt A, and the interrupt cycle chooses 100ms. In order to minimum the cycle time of A to prevent the run time of A exceeding 100ms and system error, the control procedure and
procedure B.
In neural network algorithm normalized the training samples is need to speed up the rate of n
input and output data before the final training.
5.3 Experiment Results
When speed reference is square wave signal with 100 seconds cycle, where the inverter is
tracking performance of neural network control is better than traditional PI control.
When speed reference keeps in constant, and the load is reduced to no load at 80 seconds, and increased to full load at 120 seconds, the response curves of speed with traditional PI control and neural network inverse control are shown in Fig. 11 and 12 respectively. It is clearly that the performance of resisting the load disturbing with neural network inverse
control is better than the traditional PI control.
(Speed response in PI control)
(Speed response in neural network inverse control)
6. Conclusion
In order to improve the control performance of PLC Variable Frequency Speed-regulating System, neural network inverse system is used. A mathematic model of variable frequency speed-regulating system was given, and its reversibility was testified. The inverse system and original system is compound to construct the pseudo linear system and linear control method is design to control. With experiment, neural network inverse system with PLC has its effectiveness and its feasibility in industry application.
中文譯文
PLC變頻調速的網絡反饋系統的實現
摘要。變頻調速系統,包括一個異步電動機和通用逆變器、且PLC控制被廣泛地應用于工業領域。然而,對多變量、非線性和強耦合的異步電機的控制性能卻不足,不能很好地滿足客戶的調速要求。該數學模型的變頻調速系統提出了矢量控制方式,其可逆轉性得到證實。通過構建一種基于神經網絡的逆系統,并結合變頻調速系統,pseudo-linear系統被完成了,并且為了得到性能優良的系統采用了一個線性閉環調節器。采用PLC、神經網絡逆系統在實際系統可以實現。實驗結果表明變頻調速系統的性能得到了很大的提高，并且神經網絡反饋控制的可行性得到了驗證。
1. 導論
近年來,隨著電力電子技術、微電子技術和現代控制理論,逐漸涉及到交流電機系統,這些技術已經廣泛應用于變頻器調速的AC馬達。變頻調速系統,包括一個異步電動機和通用逆變器，用來代替直流調速系統。由于在工業領域中的糟糕的環境和嚴重的干擾,選擇控制器是一個十分重要的問題。在文獻[1][2][3],介紹了利用工業控制計算機和數據采集卡實現了神經網絡反饋控制。工業控制計算機的優勢有較高的計算速度，龐大的記憶能力以及與其他軟件良好的兼容性等。但是工業控制計算機在工業應用上也有一些不足，比如運行不穩定,不可靠及更惡劣的通信能力?？删幊绦蚩刂破?PLC)控制系統是專為工業環境中的應用而設計的,它的穩定性和可靠性好。PLC控制系統,可以很容易地集成到現場總線控制系統并得到高性能的通信結構,所以它在近年來被廣泛地使用,并且深受歡迎。該系統由普通的逆變器和異步電機組成，是一種復雜的非線性系統,傳統的PID控制策略,并不能滿足要求和進一步控制。因此,如何加強系統的控制性能是非常迫切的事情。
神經網絡逆系統[4][5], 在未來幾年里將是一種新型的控制方法。其基本的想法是:對于一個給定的系統,原系統的逆系統是由一個動態神經網絡引起的,對象信號和反饋信號的組合系統被轉化成一種線性關系的解耦標準系統。隨后,一個線性閉環調節器設計可以達到較高的控制性能。該方法的優點是在工程上很容易實現。在線性化及其解耦控制正常的非線性系統能實現采用這種方法。
把神經網絡反饋結合到可編程序控制器(PLC)上就可以很容易地彌補不足的問題，解決在PLC控制系統上的非線性耦合。這個組合可以促進神經網絡反饋付諸實踐，來實現其全部的經濟效益和社會效益。
在這篇文章中，首先對神經網絡反饋方法進行了介紹,并且描述了采用矢量控制的變頻調速系統的數學模型。然后是對反饋系統進行分析的的介紹,并給出了關于PLC控制系統中構造NN-反饋系統的方法和步驟。最后,該方法在實驗中被驗證,并將傳統的PI控制和NN-反饋控制進行了對比。
2. 神經反饋網絡控制方法
基本的反饋控制方法[6]就是:對于一個給定的系統、一種α-th由反饋方法建立的完整的反饋系統,并結合反饋系統與原系統的特點,提出了一種解耦的線性關系,以標準化體系,并命名為偽線性系統。隨后,一個線性閉環調節器運行并將達到較高的控制性能。
當在“幾何領域”討論這些問題時，反饋系統控制方法并不像微分幾何方法，其特點是直接，簡單，易于理解。主要的問題是怎樣在應用軟件中獲得反饋模型。由于非線性系統是一個復雜的系統,所以很難要求嚴格解析反饋信號,這甚至是不可能的。反饋系統控制在工程應用中不能達到期望值。作為神經網絡非線性逼近能力,尤其是對于非線性的復雜系統,它會是來解決問題的強大工具。反饋系統集成了具有非線性逼近能力的反饋系統，其中具有非線性逼近能力的反饋系統能夠避免使用反饋方法帶來的麻煩。這樣就可能，運用反饋控制方法去控制一個復雜的非線性系統。a ? th NN 反饋系統的控制方法只需要較少的系統信息，比如與系統相關的命令，并且容易獲得運行網絡的反饋模型。原系統的層疊式的 NN反饋系統,會形成一個偽線性系統。然后,一個線性閉環調節校準器將工作。
3. 異步電機變頻調速系統的數學模型和它的反饋性能
異步電機變頻調速系統提供的跟蹤電流正弦脈寬調制逆變器可以表示為非線性模型在兩相循環的協調。該模型簡化為一個3-order非線性模型。如果忽略逆變器的延遲,該模型表述如下:
（1）
（表示同步角頻率；表示轉速；
表示定子的電流；表示轉子在（qd）軸線上的不穩定部分；
表示點的數量；表示互感系數；表示慣性轉矩；
表示轉子的時間常數；表示負載轉矩。）
用矢量模式,得
代進公式(1),得
（2）
可逆轉性分析(2),得
（3） （4）
可供選擇的狀態變量如下
輸入變量
由公式(4)得出結果,得
（5）
（6）
然后雅可比矩陣
（7）
（8）
作為 所以并且系統是可逆的。
相關的系統是
當變頻器運行模式的變化,在矢量磁鏈的可以忽略的磁鏈(考慮到是恒定,等于等級)。原系統簡化為一個輸入和輸出系統訂立的(2)。
根據隱函數定理，公式(3)的反饋系統可以表達為:
（9）
當反饋系統連續連接到原系統時，偽線性復合系統形成類型。
4. 網絡反饋系統的實現步驟
4.1 輸入與輸出的運行樣本的采集
采樣對網絡反饋系統的建立是極其重要的。它不僅需要獲得原系統的動態數據,還需要獲得了靜態的數據。參考信號應該包括原始系統所有的工作范圍,并確保近似。信號的欲處理的第一階段是從每0HZ到50HZ中得到10HZ，并得到開環響應。第二階段是混亂信號的輸入，當每10秒鐘出現預處理信號時，隨機信號輸入,并得到閉環響應?；谶@些輸入,將得到1600組得到運行樣本。
4.2 網絡的建設
靜態神經網絡和動態神經網絡的完美組合將能構建一個反饋系統。靜態神經網絡的結構是由2個輸入層的神經元，3個輸出層的神經元和12個隱蔽層的神經元組成。隱藏神經元的激勵函數是單調平滑雙曲正切函數。輸出層是由線性臨界激勵函數的神經元組成。運行數據是這些速度的開環，閉環的相對應速度和設置的參考的速度。50次運行之后，神經網絡的運行錯誤達到0.001。神經網絡的負荷和臨界值被保存下來。并得到原系統的反饋模型。
5. 實驗和結果
5.1 系統硬件
硬件系統包括上層監督計算機安裝，控制結構軟件WinCC6.0,西門子S7-300PLC，變頻器，異步電動機和光電編碼器。
選擇S7-315-2DP PLC控制器,它有一個PROFIBUS-DP接口和一個MPI接口。高速采集模塊是FM350-1。WinCC用MPI協議被CP5611貫穿到S7-300。
這個逆變器的類型是西門子的MMV。西門子的PLC能兼容美國的協議。在這個系統上ACB15模塊被增加在逆變器上。
5.2 軟件編程
5.2.1 通信介紹
MPI(多點接口)是一種簡單、便宜的通訊策略，運用在運行慢，非大型數據轉換的場合。在WinCC與PLC之間的數據轉換不是很大,所以選擇MPI協議。
MMV變頻器作為從動裝置連接到PROFIBUS網絡,并安裝到CB15 PROFIBUS模塊上。PPO1或PPO3的數據類型可供選擇。它允許控制信號直接發送到變頻地址,或者使用STEP7V5.2 SFC14/15的系統功能模塊。
OPC能有效的提供完整的數據和通信能力。不同類型的服務器和客戶機可以存取彼此的數據來源。比較傳統的軟件模式和硬件發展,設備生產商只需要培養一個操作員。這樣可以縮短開發周期,節省人力資源,并簡化了整個控制系統的結構。
矩陣實驗室的神經網絡運行需要系統各種各樣數據的時候，這些數據不能從PLC或WinCC直接讀取。所以O(shè)PC技術可以用來獲得在WinCC和Exce之中所需的數據。設置WinCC作為OPC DA的服務器,一個OPC客戶將被很好的建立關于VBA。系統的實時數據被WinCC讀取并寫到Excel上,然后Excel上的數據被轉換到矩陣實驗室為在離線運行時獲得原系統的反饋系統。
5.2.2控制程序
通常用STEP7 V5.2的標準模板庫來對通訊，數據采集和控制算法進行編程，速度采樣程序和存儲程序被編程為有規律的中斷程序A，中斷周期為100毫秒。為了阻止程序A運行時間超過100毫秒，減小程序的運行周期和系統錯誤，控制步驟和神經網絡算法被編程為主程序B。
神經網絡算法標準化對運行采樣來說是必要的以便加快信號收集速度，在最終運行之前輸入和輸出信號乘以一個放大系數。
5.3 實驗結果
當速度參照是100秒每周期的方波信號時,逆變器運行的是矢量模式。結果表明,神經網絡控制的跟蹤性能均優于傳統的常規PI控制。
當速度參照保持恒定時,經過80秒時間，負荷降低到?jīng)]有負荷,經過120秒時間,負荷增加到滿負荷，所以在傳統控制下的速度響應曲線和網絡反饋控制下的速度響應曲線如下圖所示。很明顯,在穩定性能上，網絡反饋控制的負載擾動優于傳統的PI控制的負載擾動。
（PI控制下的速度響應） （網絡反饋控制下的速度響應）
6. 結論
為了改善PLC變頻調速系統的控制性能，因而神經網絡反饋系統被使用。并給出了一個變頻調速系統的數學模型,且其可逆轉性得到了檢驗。反饋系統和原系統被組合并構建成偽線性系統，并設計了線性控制的方法進行控制。通過實驗,PLC神經網絡的反饋系統在工業應用中具有有效性和可行性的到了驗證。