購買設計請充值后下載,,資源目錄下的文件所見即所得,都可以點開預覽,,資料完整,充值下載可得到資源目錄里的所有文件。。。【注】:dwg后綴為CAD圖紙,doc,docx為WORD文檔,原稿無水印,可編輯。。。具體請見文件預覽,有不明白之處,可咨詢QQ:12401814
南京理工大學泰州科技學院
畢業設計說明書(論文)
作 者:
陳游
學 號:
05010113
系 部:
機械工程系
專 業:
機械工程及自動化
題 目:
副教授
王栓虎
指導者:
(姓 名) (專業技術職務)
評閱者:
(姓 名) (專業技術職務)
2009 年 6 月
畢業設計說明書(論文)中文摘要
本次畢業設計是針對CA6140車床手柄座的制作進行實質性的研究,論文只要是通過5個部分對零件的加工方式進行說明,首先是對零件的工藝進行分析,根據分析的結果制定加工工藝路線,工藝路線的確定能很好的幫助制造者來完成零件,依照分析的路線來合理的進行工序加工,將每到工序的計算寫入設計書中,然后繪制加工的工序卡.這樣使得零件的制造能一目了然,并且對后面的夾具設計起到鋪墊.當工序完成后針對其中的一道工序我們進行專用夾具的設計,本次畢業設計是針對φ14mm的孔進行加工,所以夾具的設計也是為了方便這道加工而設計的.夾具的設計關鍵是定位元件和加緊元件的選擇.由于設計的需要我們還要運用到組合機床,所以這里也要考慮到專用夾具是否適合組合機床.組合機床的設計是針對φ14mm的孔夾具而設計的,按照實際情況本次設計選用了利式組合機床,選定后就組合機床的鉆頭,支撐桿,機床底座等進行相應的選擇,以能最好的加工出此道工序.根據零件工序圖和零件加工示意圖,以及組合機床聯系尺寸圖,可以將零件和實際生產相聯系.
關鍵詞 工藝分析 夾具 組合機床 加工工序
畢業設計說明書(論文)外文摘要
Title Block Handle Lathe Processing
Abstract
The graduation project is a CA6140 lathe for the production of Block handle substantive research, Paper as long as it is through the five parts of the processing of parts means that, first of all parts of the process is to analyze the results based on an analysis of the development process route, process route can be a good help to identify the manufacturer to complete the parts, in accordance with the analysis of route to carry out a reasonable process processing, will be calculated for each process write to the design of the book, and then drawing card processing procedures. This allows the manufacture of spare parts can be at a glance, and on the back of the fixture design to pave the way to play. Modular Machine Tool Design φ14mm hole for fixture designed in accordance with the actual situation in the design of the selected combination of profit-type machine tools, machine tools, selected after the combination of bits, supporting bar, base, etc. machine corresponding options to be the most this is a good processing procedures.Processes in accordance with parts schematic diagram and spare parts processing, as well as the portfolio size machine linked maps, spare parts and can be linked to actual production.
Keywords Process Analysis Fixture Modular Machine Tool Processing