購買設計請充值后下載,,資源目錄下的文件所見即所得,都可以點開預覽,,資料完整,充值下載可得到資源目錄里的所有文件。。。【注】:dwg后綴為CAD圖紙,doc,docx為WORD文檔,原稿無水印,可編輯。。。具體請見文件預覽,有不明白之處,可咨詢QQ:12401814
摘 要
卷?yè)P(yáng)機,是用卷筒纏繞鋼絲繩以提升或牽引重物的輕小型起重設備。本設計以零件疲勞理論和線性累積損傷假說為理論基礎,運用靜力學的普遍原理,分析和解決了絞車運動過程中的一些受力和運動問題,力求最優化和最可靠設計絞車減速器和卷筒。
本文主要介紹了卷?yè)P(yáng)機的發展歷史,用途,組成及工作原理;卷?yè)P(yáng)機的工作特點;設計的一般步驟;使用中存在的問題及改進措施。在本次卷?yè)P(yáng)機的設計過程中,著重對減速器、卷筒進行了分析和設計。對重要的部件進行了受力分析、強度的校核,根據其常見失效形式、影響因素及基本設計要求,給出了重要部件的受力分析、強度和剛度的設計方法。
關鍵詞:卷?yè)P(yáng)機; 減速器; 軸; 齒輪
ABSTRACT
The winch, is promotes or the hauling heavy item light small hoisting equipment with the reel winding steel wire. This design take the components fatigue theory and the linearity cumulative damage hypothesis as the rationale, the utilization statics general principle, analyzed and has solved in winch rate process some stress and the movement question, made every effort the optimization and the most reliable design winch reduction gear and the reel. In the most universal winch type of drive and in the structure foundation, utilizes the position sensing and the water level sensing technology, uses the PLC control, realized the traction winch to promote and to release the pump house according to the water level the automatic control and the hand control.
This article mainly introduced winch's historical development, the use, the composition and the principle of work; Traction winch's operating feature; Design general step; In the use exists question and corrective measure. In this traction winch's design process, to the reduction gear, the reel has carried on the analysis and the design emphatically. Has carried on the stress analysis, the intensity examination to the important part, according to its common failure mode, the influencing factor and the basic design request, has given the important part's stress analysis, the intensity and the rigidity design method.
Keywords:Traction winch;Reduction gear;shaft;gear