微型貨車鋼板彈簧的結構設計與校核【獨家課程畢業設計含4張CAD圖紙帶任務書+開題報告+中期報告+答辯ppt+外文翻譯】

微型貨車鋼板彈簧的結構設計與校核【獨家課程畢業設計含4張CAD圖紙帶任務書+開題報告+中期報告+答辯ppt+外文翻譯】

微型貨車鋼板彈簧的結構設計與校核

 摘要：本次設計中首先介紹了鋼板彈簧的發展歷程并且對其未來的發展趨勢作出分析；然后分析了鋼板彈簧對汽車造成的影響有哪些，比如平順性和操作穩定性等方面；接著根據鋼板彈簧各個結構的優缺點和具體車型的使用用途，對各主要零部件進行結構上的選型和計算；

因?yàn)殇摪鍙椈上噍^于其它的彈簧有結構簡單，維修方便等優點所以在載貨汽車上有普遍的應用。同時它的缺點是也使得它無法應用在獨立懸架的汽車上，明顯的缺點有鋼板彈簧懸架具有較大的重量，較為長的縱向尺寸，同時有較強的剛度，使得舒適性相對來說也是較差，并且鋼板彈簧懸架在與車架進行連接的部位也容易在使用中產生磨損。

在這次的設計中我們著重對微型貨車的鋼板彈簧進行結構設計，通過計算并繪制出圖紙。

    關鍵詞：微型貨車；鋼板彈簧；結構設計；校核

Structure design and check core of micro steel plate spring

Abstract：First, the paper introduces the development of leaf spring and analyzes its future development trend Then, it analyzes the influence of leaf spring on automobile, such as ride comfort and operation stability Then the detailed design steps and design requirements of leaf spring are described, and the structure selection and calculation of the main parts are made The arc height and curvature radius of the leaf spring are calculated, and the strength and stiffness of the material is checked and checked, and the steel spring is checked.

Because the leaf spring has the advantages of simple structure and convenient maintenance compared to other springs, it has a common application in the truck. At the same time, its disadvantage is that it can not be applied on the automobile

of the independent suspension, obvious disadvantage that the steel spring suspension has a larger weight, the longitudinal size of the radiation, and the stiffness is relatively poor, and the part of the steel spring suspension is easy to wear in use.

In this design, we focus on the structure design of the leaf spring of micro, calculate and draw the drawings.

Keywords：Micro； Sheet spring； Structural design； Check

目  錄

摘要.............................................................................................................................................I

Abstract......................................................................................................................................II

1緒論..........................................................................................................................................1

1.1鋼板彈簧的背景及意義......................................................................................................1

1.2國外的發展現狀及發展趨勢...............................................................................................1

1.3國內的發展現狀及發展趨勢...............................................................................................3

1.4研究意義和內容...................................................................................................................4

1.5本章小結...............................................................................................................................6

2鋼板彈簧懸架總體方案分析..................................................................................................7

2.1鋼板彈簧概述.......................................................................................................................7

2.2鋼板彈簧懸架的基本結構和工作原理...............................................................................9

2.2.1鋼板彈簧懸架基本結構....................................................................................................9

2.2.2鋼板彈簧懸架工作原理..................................................................................................11

2.3鋼板彈簧懸架系統總體結構方案確定.............................................................................11

2.4鋼板彈簧懸架系統各主要零部件選型.............................................................................12

2.4.1葉片斷面..........................................................................................................................12

2.4.2 葉片端頭的形狀......................................................................................................13

2.4.3 鋼板彈簧與車架的連接形式的確定.............................................................................14

2.4.4 吊耳及鋼板彈簧銷的結構.............................................................................................14

2.4.5 鋼板彈簧卷耳和襯套.....................................................................................................14

2.4.6 彈簧夾箍.............................................................................................................14

2.4.7鋼板彈簧中心螺栓.........................................................................................................14

2.5技術經濟分析.........................................................................................................15

3鋼板彈簧懸架系統主要性能參數的確定...................................................................16

3.1鋼板彈簧懸架系統靜撓度和動撓度的選擇.....................................................................16

3.2車型主要參數的確定..............................................................................................16

4鋼板彈簧懸架的計算和校核................................................................................................17

4.1初選參數.............................................................................................................................17

4.1.1主片長度...........................................................................................................17

4.1.2斷面尺寸及片數的確定..................................................................................................17

4.2各片長度的確定.................................................................................................................19

4.3鋼板彈簧各片預應力及弧高............................................................................................20

4.4總成在自由狀態下及裝配后的弧高................................................................................21

4.4.1.彈簧總成自由弧高的確定..............................................................................................21

4.4.2鋼板彈簧總成裝配后的弧高.........................................................................................21

4.5鋼板彈簧強制動時強度校核.............................................................................................22

4.6鋼板彈簧剛度和應力校核.................................................................................................22

5結論........................................................................................................................................23

參考文獻..................................................................................................................................24

致謝.......................................................................................................................................25

【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】t

中心螺栓.dwg

外文文獻.docx

微型貨車鋼板彈簧的結構設計與校核.docx

微型貨車鋼板彈簧的結構設計與校核中期報告.doc

微型貨車鋼板彈簧的結構設計與校核任務書.doc

微型貨車鋼板彈簧的結構設計與校核開題報告.doc

微型貨車鋼板彈簧的結構設計與校核答辯ppt.pptx

文件清單.txt

鋼板彈簧總成.dwg

鋼板彈簧第一片.dwg

鋼板彈簧第二片.dwg