畢業設計（論文）開題報告課題名稱 輔助站立座椅的新結構及控制系統設計學 院 專 業 機械電子工程 _班 級 _______________________學 號 _____姓 名 _____ 指導教師 定稿日期： 年 12 月 日輔助站立座椅的新結構及控制系統設計一、課題的來源、目的、意義，國內外基本情況1．課題來源本課題來自企業項目和社會需求，是設計一種基于服務機器人系統技術的輔助站立座椅，實現座椅的移動、展合等機械運動，簡化其結構，增加了移動的可控性，可實現座椅的移動，升降，轉彎等功能，為未來老人和殘疾人的家居生活提供新模式和新概念并促進助老/助殘系列化服務機器人產品的發展智能機器人的應用。2．課題目的基于服務機器人系統技術的輔助站立座椅是滿足老年人和殘疾人的居家生活需要，形成未來老人和殘疾人家居生活的新模式和新概念，促進助老/助殘系列化服務機器人產品的發展所必需的。隨著中國一二線城市老齡化程度的逐漸加深，便捷型家居設計和人性化設計理念下的產品正逐步進入我們的生活。如現在大力推廣的老年人手機、折疊老人購物車等產品都是基于這一理念，使科技和技術不僅僅局限于有限的范圍，并能實現達到更多的益于人本身的目的。目前，輔助站立座椅在國外已有研究并有小量產品，國內也有少量產品問世但缺乏人性化的考慮，使用者相對并不十分方便，國外產品相對比較成熟但價格昂貴，而國內大多數用戶難以承受。為此利用機械設計理論、自動控制技術設計滿足老人/殘疾人家居生活所必需的坐姿與站姿轉換輔助站式座椅具有重要的意義。人性化設計的前身是人體工程學的出現和發展，人體工程學起源于歐美，原先是在工業社會中，開始大量生產和使用機械設施的情況下，探求人與機械之間的協調關系，作為獨立學科有 40 多年的歷史。第二次世界大戰中的軍事科學技術，開始運用人體工程學的原理和方法，在坦克、飛機的內艙設計中，如何使人在艙內有效地操作和戰斗，并盡可能使人長時間地在小空間內減少疲勞，即處理好：人-機-環境的協調關系。及至第二次世界大戰后，各國把人體工程學的實踐和研究成果，迅速有效地運用到空間技術、工業生產、建筑及室內設計中去，1960 年創建了國際人體工程學協會。本課題的目的在于通過比較前人的設計產品從而進行結構優化使其能夠降低成本并處于人性化的考慮，做部分結構的重新設計，以滿足低收入人群的接受能力和需求。為了適應中國部分城市老齡化的現狀和老人及殘障人士的需求，設計一種方便坐立并輕松戰立的輔助型座椅，可實現座椅的移動，升降，轉向等功能，為未來老人和殘疾人的家居生活提供新模式和新概念并促進助老/助殘系列化服務機器人產品的發展智能機器人的應用。3．課題意義輔助站立座椅是近年來國內外科技服務人類的一個熱門話題。以“理解·關愛·和諧生活”為主題的第五屆中國國際殘疾人展，于2010年5月中旬在上海國際展覽中心舉行。由于世博會首創設立了關愛殘疾人的“生命陽光館” ，該屆展會備受關注。全球最先進的無障礙設施同臺亮相，通過這些輔助設備可以全面提升殘疾人和老年人的生活質量，讓他們像常人一樣處處展現“生命陽光” 。 而一直以來，坐輪椅的殘疾人最大的夢想是能站立行走，在該展會上，一種可以讓高位截癱患者通過操控按鈕就能直立起來的電動直立輪椅首次亮相，備受關注。據現場工作人員介紹，直立輪椅能夠讓全部喪失行動能力的患者在輪椅的多功能支持下直立“行走” ，通過彌補下肢的不便，使他們甚至能夠完成一定的日常工作。由此可見，輔助戰立座椅對于現代城市化生活中的年老或殘障人士有著重要的社會意義和巨大的市場需求前景，可以大大改善該人群的生活范圍及生活質量，減少護工等的人力資源消耗，大大減輕了社會系統負擔。課題適應中國部分城市老齡化的現狀和老人及殘障人士的需求，設計一種方便坐立并輕松戰立的輔助型座椅，可實現座椅的移動，升降，轉彎等功能，為未來老人和殘疾人的家居生活提供新模式和新概念并促進助老/助殘系列化服務機器人產品的發展智能機器人的應用。4．國內外發展的基本概況國外輔助站立座椅領域發展：日本在家庭機器人及智能人性化家具設計產品中有著較長的發展歷史，對于輔助型系統和輔助生活型機械發展比較早。在輔助機械座椅的標準制定中更是有著嚴格的要求。對于其各項參數名稱部分如下(1）種類 包括其形式和機能(2）各部分名稱(3）要求事項 包括一般要求事項一般及機構要求制造、材料和性能(4）實驗環境及其實驗機械 包括椅面椅背和承重等(5）規格大小 (6）表示另外在傳統輪椅的基礎上，日本本田公司在借助了日本機器人 ASIMO 直立行走的的技術上大膽的創新于 2008 年 11 月 7日，日本本田汽車公司展示了這款步行輔助裝置。該產品用來支撐身體重量，減少膝關節壓力，以幫助人們站立并做出蹲伏的姿勢。這對人們排長隊、東奔西跑幫人們送貨、以及陪女友逛商場等來說是非常有用的發明。 走路輔助器由座椅、腿支架、鞋這三部分組成。坐上座椅，穿好鞋扣上扣子，打開開關它就會帶你四處行走了。本田公司的介紹，產品系統包括：一臺電腦、發動機、傳動裝置、電池以及傳感器。它利用臀關節感應器來搜集行走時的信息，幫你站立，再藉由馬達協助你行走。值得一提的是，這款產品采用本田開發的平板式無刷電機驅動，體積非常小巧。我國在家庭機器人及智能人性化家具設計中還處于落后的位置，原因在于起步較其他發達國家的投入和應用較晚。輔助站立座椅的開發和投入也只是近幾年少部分企業在看到國外的產品后才開始研究并發展。在杭州，一家成立于 2010 年的能源科技公司，就借鑒了國外的這一發展趨勢和思路以全新的設計理念，高端的科技運用，向年老及殘障人士提供普通電動輪椅、站立式電動輪椅等一系列產品。部分產品圖樣如下 我國的輪椅設計已經在逐漸從借鑒到能夠自主的研發并實現部分的創新。輪椅作為一種代步輔助運動的工具，消費者一般不會購買第二次，所以，在某種程度上輪椅是一種一次性消費產品，這就要求輪椅的使用壽命足夠長，一般輪椅的使用年限 5、6 年左右，超過這個年限還使用就存在許多安全隱患了。而國內企業往往在開發和生產中忽視這一點。所以，輪椅在設計之初就應該考慮到它的回收，以便材料的重復使用，防止不必要的浪費。這也是國內在這一領域的環?？沙掷m(xù)發展的一種趨勢。 以下列舉幾種國內外對于站立輔助機械的產品圖 1 為所設計的自彈式的輔助站立椅墊。該產品的重量輕，攜帶性好。但對于材料的要求比較高。價格也相應的偏高。圖 1圖 2 為國內自主設計制造的可實現站立的輔助式站立輪椅?？蓪?shí)現座椅的展合和移動。圖 2圖 3 是本田公司借鑒asimo 的直立行走技術創新的改變了人們對于傳統輪椅的思路，是該機構還能實現新走的運動方式。使用方便的乘坐型座椅僅僅只需穿上連在裝置上的鞋，再坐上座椅，便可啟動輔助系統。 通過開發能夠自動跟蹤身體和腳動作的座椅和圖 3 框架結構，使輔助力量能夠像人腳的力量一樣移向身體的重心附近。從而使步行、上下臺階、半蹲等各種各樣的動作和姿勢能得到輔助。二、 預計達到的目標、關鍵理論和技術、完成課題的方案和主要措施1.課題預計達到的目標通過對市面上的相關同類產品以及國內外的各種專利進行研究與分析，從使用的實用性，人性化，簡易性出發，以減少制造成本，降低售價且功能齊全，增加可回收利用性，設計一臺輔助站立座椅，可實現座椅的移動，升降，轉彎等功能?？刂品桨覆捎脝纹瑱C(jī)控制，整個座椅有一個遙控器，方便操縱者自由實施該座椅的各項功能。1） 前進或后退2） 順/逆時針轉彎3） 座位平臺的升降4） 移動及升降的互鎖5） 輔助引導輪支架的下擺2.難點1). 座椅各關節聯動是否流暢2)．電氣控制方面的靈敏度是否能達到理想值3). 控制過程中電機轉速是否合理4). 供電量是否足夠5). 互鎖能否保證安全3．關鍵理論及技術通過與同類產品的對比比較，決定采用升降電動缸機構作為輪椅的運動傳遞源。在確保各個機構實現自身運動前提下，保證各個之間不發生干涉和碰撞。在確定各個機構總體的運動方案的前提下，通過圖解法或使用相關軟件初步確定各個桿件的尺寸，通過解析法列出機構的運動學方程或使用相關軟件如ANSYA、ADAMS，在機構的疲勞極限范圍內，尋找一種最佳的尺寸和機構形狀使得輔助站立椅的運動穩定性最高，減少因?yàn)橐苿?dòng)或升降而產生的沖擊和振動，使操控者得到最大的靈敏度。達到的理想運動示意和機構原理圖如下：在確定各個機構之間的運動方式及尺寸之后，確定各機構之間的連接方式，保證各個零件之間的連接可靠，運動時不產生卡死，噪音等問題。零件盡可能的采用焊接，螺栓連接等常見連接方式，以降低生產成本。采用正確合理的整體機構裝配工藝，避免機構因?yàn)檠b配的順序問題或裝配的方法不對而造成破壞原先設想的機構運動，采用合理的表面處理方式，例如噴砂處理，外表面噴塑等。電氣控制方面，由于工作環境并不十分惡劣，選用單片機控制而非 PLC 控制，降低了控制成本，而且單片機控制相對 PLC 有更好的靈敏度，便于控制的操作和精度。為了使用安全采用電器與機械互鎖的方式，保證了輪椅在使用過程中的穩定性，防止因操控者的誤操作而造成的機構損毀和人員的受傷。確保使用者在使用的過程中，電線不因?yàn)闄C(jī)構運動而損壞。在新型機構的研究基礎上，進一步添加合理的人性化的設計，目的使使用者更舒適更符合人體工程學要求；建立合理的機構之間運動的邏輯連貫，確保機構之間的幾個運動能夠同時操作，通過聯動的方式，確保使用者能自由控制該輪椅。三、研究方案執行機構采用一個普通直流儲能電瓶驅動輔助站立椅升降機構采用連桿傳動輔助站立椅移動、轉向機構采用直流電機傳動電氣控制方面，采用單片機控制 四、論文的框架1.核心部件的選型初選普通直流電機缸作為動力，因?yàn)槠鋬r(jià)格低廉，結構原理簡單，體積較小，功率較小。初選MCS-51單片機程序設計，因?yàn)槠渚哂斜容^大的尋址空間 ，處理功能強 ，指令系統相對完善以及完善的各種中斷源，抗干擾能力加強，工作亦相對穩定 ，開發環境要求較低，軟件資源十分豐富。 2.完成課題的步驟(1)通過資料查閱與分析，了解技術的國內外現狀和發展趨勢（對國內外技術及現有產品進行對比分析）(2)分析設計要求，比較幾種可行的傳動方案性能(3)按所需要求，對輔助站立座椅進行整體規劃(4)確定各個機構的類型并進行具體設計（包括零件尺寸設計、零件材料選擇）(5)完成電氣控制部分設計（包括供電方式、控制順序、單片機程序及接線圖 ）(6)繪制圖紙(7)完成設計說明書3．完成課題的主要措施利用 ADAMS 機械系統動力學仿真軟件，創建完全參數化的機械系統幾何模型，其求解器采用多剛體動力學理論中的拉格朗日方程方法，建立系統動力學方程，對虛擬機械系統進行運動學和動力學分析，輸出位移、速度、加速度和反作用力曲線。利用三維設計軟件 SOLIDWORKS、UG 等，繪制三維零件圖以及三維裝配圖，生成虛擬樣機模型。檢查該樣機存在的干涉等問題，然后利用該樣機模型制作裝配動畫。最后利用 AUTOCAD 軟件繪制全套零件二維工作圖以及二維總裝配圖。利用電路仿真軟件設計電路圖，調試單片機程序，完成電氣控制部分的設計。五、課題進展計劃1、查閱有關技術文獻，翻譯英文文獻，了 第七學期內完成解技術的國內外現狀和發展趨勢 2、座椅新方案確定 第七學期內完成3、座椅的總體方案確定 第七學期內完成4、動力分析、主要傳動參數確定 1 周5、機械系統機構的設計 2.5 周6、控制系統設計（含程序設計） 2 周7、三維設計、干涉檢驗 2 周8、機械機構參數優化及主要零件校核 3 周9、繪制座椅總圖、零件圖工作圖 2.5 周10、撰寫畢業設計說明書 1 周11、提交設計資料、答辯準備 1 周六、 主要參考文獻[1] 袁劍雄，李晨霞 潘承怡編，《機械結構設計禁忌》，機械工業出版社，2008.06[2] 張建民主編，《機電一體化系統設計》，高等教育出版社，2000.07[3] 王淑芳著，《電機驅動技術》，科學教育出版社，2008[4] 成大先著，《機械設計手冊》單行本-機構，化學工業出版社，2004.01[5] 孔凌嘉著，《簡明機械設計手冊》，北京理工大學出版社，2008.02[6] 傅蔡安，吳永祥，謝家瀛著，《連桿機構設計與應用創新》，2008.01[7] 華大年，華志宏著，《材料成形及機械制造工藝基礎》，2002.11[8] 張毅剛著，《單片機原理及應用》，2003.12[9] 魏崢著，《三維計算機輔助設計—SolidWorks 實用教程》，2007.05[10] 【JIS 日本標準】JIS T9206-2001 電動輪椅和機動拖斗電磁兼容性的要求和試驗方法[11] 賈民平，張洪亭，周劍英著，《測試技術》，2001.12[12] 鄧星鐘著，《機電傳動控制》，2000.06[13] 王知行，鄧宗全著，《機械原理》，2000.02[14] 曹巖，趙汝嘉著，《Solidworks2007 精通篇》，2007.12[15] 胡鳳蘭著，《互換性與技術測量基礎》，2005.02 [16] S. H. Lu and C. C. Lee, “Interferometry Measurement of Gauge Block Using External Cavity Diode Laser”, International Symposium on Precision Mechanical Measurement, Aug. 12-22, (2002), Hefei-Jinan, China.[17] JIS T9255-2007 Chairs and seats with electrical mechanisms assist standing up and sitting down.pdf指導教師評語:指 導 教 師 簽 字 年 月 日評議小組意見1、論文選題：□有理論意義；□有工程背景；□有實用價值；□意義不大。2、論文的難度：□偏高；□適當；□偏低。3、論文的工作量：□偏大；□適當；□偏小。4、設計或研究方案的可行性：□好；□較好；□一般；□不可行。5、學生對文獻資料及課題的了解程度：□好；□較好；□一般；□較差。6、學生在論文選題報告中反映出的綜合能力和表達能力：□好；□較好；□一般；□較差。7、學生在論文選題報告中反映出的創新能力：□好；□較好；□一般；□較差。8、對論文選題報告的總體評價：□好；□較好；□一般；□較差（在相應的方塊內作記號“√” ）二級學院所確定評議小組名單（3-5人）組長： 、組員： 、 、 、 單位蓋章 主管領導簽名： 年 月 日評議結論評議小組組長簽名：評議小組組員簽名：年 月 日輔助站立座椅的新結構及控制系統設計 I摘 要為了適應中國部分城市老齡化的現狀和老人及殘障人士的需求，設計一種方便坐立并輕松站立的輔助型座椅，可實現座椅的移動，升降，轉向等功能，為未來老人和殘疾人的家居生活提供新模式和新概念并促進助老/助殘系列化服務機器人產品的發展智能機器人的應用。本文運用機械系統動力學分析軟件ADAMS對輔助站立座椅的推桿及座椅前板進行運動學與動力學分析和優化?；贏T89C51單片機實現對座椅的控制，通過對電動推桿及直流電機的正反轉控制，實現對座椅位姿的調節。使用三維建模軟件SOLIDWORKS對座椅建模并進行干涉檢驗。關鍵詞：輔助站立座椅，單片機，ADAMS，連桿機構輔助站立座椅的新結構及控制系統設計 IIAbstractIn order to adapt to the Chinese part city aging actuality and the elderly and the disabled needs, design a convenient sitting and standing relaxed auxiliary type seat, can realize the moving seat, lifting, steering and other functions, for the future of the elderly and the disabled, home furnishing life offers a new mode and new concept and the promotion of the elderly and the disabled seriation service product development of intelligent robot application.Based on the mechanical system dynamics analysis software ADAMS on assistive chair putt and the front seat plate kinematics and dynamics analysis and optimization. Based on the AT89C51MCU to control the seat, electric putter and DC motor control, the seat position adjustment. Use of 3D modeling software SOLIDWORKS to seat modeling and interference checking.Key words: Assistive chair, Single chip microcomputer(SCM), ADAMS, Link mechanism輔助站立座椅的新結構及控制系統設計 III目 錄1 緒論 .11.1課題的來源、目的、意義 .11.2國內外基本情況 .21.3本文主要研究內容 .61.4本章小結 .82 座椅結構的整體方案 .82.1 護理要求 82.2 輔助站立座椅的總體方案 82.5 構想的成型 92.6 輔助站立座椅的組成 102.7 本章小結 103 座椅的結構設計 113.1 引言 113.2 輔助站立座椅的機構介紹 113.3初步確定機構中個桿件的尺寸 .123.4輔助站立輪椅的三維建模與干涉檢驗 .133.5 本章小結 144 座椅部分零件的校核 154.1 引言 154.2 力學計算 154.3本章小結 .195 座椅推桿的動力分析及前座板的運動分析 205.1 引言 205.2 運動機構的動力學分析 205.3 本章小結 396.輔助站立輪椅控制系統設計 406.1 引言 406.2 控制系統方案 406.3 控制系統邏輯 40輔助站立座椅的新結構及控制系統設計 IV6.4 控制系統硬件設計 416.5按鍵電路互鎖 .466.6 本章小結 467 結論 478 參考文獻 489 致謝 49輔助站立座椅的新結構及控制系統設計 1輔助站立輪椅 （文獻翻譯) 11輔助輪椅的設計美國專利4519649摘要:輪椅改良設計使在身體支撐于一個主框架上，可以使坐姿改變而無需使用外部的升降力達到獨立的站立姿態。輪椅包括配套驅動輪、輔助輪和機構的支撐，腰部支撐部件和靠背部件彼此形成的主結構。前部的主結構和腰部支撐部件的尖端部分設一個支點，并擴展部件的支撐與支撐腰部支撐的部件，作為支撐點之間的中間點的主要結構和腰部支點支撐部件。依靠推輪椅使用者的力量（身體抬起，使用者通過他或她的上肢的力量）和擴展的力量。1 輪椅的各部件: 1.一個主框架配套驅動輪和輔助輪;身體的支撐框架包括下肢軸互聯支撐構件，腰部支撐構件和靠背的構件，該主結構的身體支撐架被作為獨立的結構組成，前端部分的腰部支撐構件是身體支撐架軸連接前端部分支點的主體。裝有氣彈簧的一端，氣彈簧的軸連接到主體上，并在其另一端連接軸及其活塞桿腰部支撐部件和架等機構的支撐，擴展和回縮氣彈簧的原因，腰部支撐構件旋轉支點主體。鎖定在可操作的連接，空氣為鎖定彈簧的氣體在任意位置之間的全面伸長和一個完全縮回的位置，以便恢復彈簧在腰部規定的角度范圍內任意角度與水平方面的支撐構件其旋轉的支點方法，充分伸長，氣彈簧相應的座位和站立身體支撐架所述位置，分別表示完全縮回的位置。2. 其中一個要求 1 中所示的輪椅，表示鎖定方式包括閥門彈簧接收機構，氣彈簧的操作桿。安裝一個可操作的雙節點支撐，操作線進行閥門操作桿表示閥門的連接操作桿，其緊握操作桿，從而允許伸長和收縮的氣彈簧，而釋放操作桿引起鎖定氣彈簧，以免伸長或收縮。輔助站立輪椅 （文獻翻譯) 223.要求 1 中所示的輪椅，其中腰部支撐構件連接下肢支持構件，通過鏈接機制。 4.主框架作為 3 定義輪椅，其中鏈接機制，腰部支撐的構件，其余構件包括一個平行四邊形的 4 桿的鏈接。5.作為 3 定義輪椅，鏈接機制，腰部支撐的構件，下肢支撐構件包括有一個任意長度的 4 桿的鏈接機制。2 說明：2.1背景本發明涉及到了輪椅，這使得它可以與一個極其有限的或沒有的功能相結合，如截癱下肢殘疾人從坐姿改變他或她的姿勢，以獨立的姿態，使用其她推力（升殘疾人身體由他或她的上肢動作） ，他或她每天練習，它的動力無需使用任何外部電源。輪椅是一種所需的覆蓋范圍大幅走相同的議案，并可以作為一種短距離的運輸車輛的車輛。因此，輪椅必須有一個全功能作為日常儀器，運動功能。這使得它可以為殘疾人開展工作所使用的輪椅。不過，按照的傳統輪椅，輪椅的使用者只可以做固定的姿勢工作，但能不能做到可以站立的姿勢時的工作，因?yàn)樗蛩氖挚赡懿荒苓_(dá)到很高的位置。近年來，輪椅使用外接電源（如電機驅動器使用電池作為動力源）為一個獨立的機制已經提出了一個輪椅，這使用戶可以獨立以站姿的姿態下工作。然而，這種輪椅涉及的收費工作和維護復雜的缺點，增加輪椅的重量和輪椅本身有限的多功能性是極其昂貴的。輔助站立輪椅 （文獻翻譯) 442.2 相關的圖紙F(tuán)IG. 1是一個側視圖。根據本發明的一個實例中的輪椅;輔助站立輪椅 （文獻翻譯) 55FIG. 2圖1的后視圖FIG. 3 是一個透視圖顯示的狀態，其中一個被用來作為一個擴展部件的氣彈簧;輔助站立輪椅 （文獻翻譯) 66FIG. 4 是一個圖表，顯示的座位角度（站立的角度）和應用于座椅和腳踏板的負荷之間的關系3 優選實施的案例：在圖1和圖2，參考圖1代表一個主體，支撐驅動2和第3輪輔助輪。肘支撐4個固定上部的主構件，每邊1個。參考5代表身體支撐架肢體較低的支撐部件6，腰部支撐構件7和8靠背構件組成。這些構件是連接相鄰部件彼此之間的相對回轉的方式。一個腳踏板和著地部件10是固定的低端下肢的支撐構件6。 7腰部支撐構件的尖端是彎曲的并且弓狀形式和一個支架11固定弓狀部分，其安裝前部的主框架由一個支點12 和1?？勘硺?gòu)件8，腰部支撐構件7和下肢支撐構件6連接兩個4桿的鏈接到另一個獨立的機構，包括身體支撐架5。在這些鏈接，靠背8部件和腰部支撐部件7環節是連接 A 和 B 的支點12 1 4桿的平行四邊形鏈接，并鏈接腰部支撐構件7和下肢的支撐構件6是一個4桿的鏈路輔助站立輪椅 （文獻翻譯) 77連接的部件，6，7和鏈接 C 至支點12之間的聯合，并可能有一個任意的或可選的長度。這兩個鏈接機制是安裝在主體1。一個氣彈簧作為一個升縮的部件13中間之間的主體1和腰部支撐構件7收縮的彈簧13支撐，可以提高和支持點作為支點12腰部支撐構件7 。這氣彈簧是一種利用高壓氣體密封在缸14如圖壓力的一個彈簧。 部件3啟動，并在任意位置停止，活塞和氣缸內的活塞連接到一桿15。一個氣彈簧接收機構16安裝到主體1，而15桿裝有腰部支撐構件7。操作一個閥門的操作按鈕17（以下簡稱為“鎖定按鈕” ） ，可以通過遠程控制操作桿18安裝到手肘支撐成員4。在圖紙上，參考數字19代表的操作線20是一個閥門操作桿。當操作桿18啟動，閥門操作桿20和17閥門的操作按鈕被啟動箭頭指示的方向和釋放鎖氣彈簧13。握操作桿18時被釋放，另一方面，閥操作桿20和17閥門的操作按鈕啟動以相反的方向鎖定，即氣彈簧13。在輪椅上，動力依靠推輪椅的用戶（推高了用戶的上肢身體力量）和反應氣彈簧的力量。用戶可以通過使用這兩種力的獨立姿態。的使用方式如下。輪椅上站起來，需要先剎車，膝蓋和腰部使用者的身體會被牢牢地固定皮帶輪椅。準備完成后，安裝操作桿18肘支撐構件4可啟動，氣彈簧17鎖定按鈕被壓下，以便打開氣彈簧鎖。在氣彈簧的鎖被釋放的階段，開始動作。在這種情況下，用戶把他或她的手的手肘支撐件4，然后推動機構，以減少他或她的體重經座位15桿氣彈簧，這樣延伸，使氣體反應的座位輪椅開始提升。用戶在待機期間，18桿處在一個理想的高度，以消除鎖定按鈕17的推力和鎖定氣彈簧。因此，可以固定在那個位置的座位。要返回從站立的姿勢到坐姿，首先鎖定氣彈簧被釋放的18桿，并同時抓住肘部支撐件4用戶會降低他或她的身體，以能夠使引導他她的體重的座位上。在這種情況下，用戶的重量，克服了氣體反應和桿氣彈簧的合力，這樣的座位開始緩慢降低。在這種情況下，用戶可以固定在所需的位置鎖定氣彈簧座椅。以上所述，站立時腰部支撐構件的最大角度相對水平面為75度，其角度可以很容易地設置用戶所需的任何值。在站立的的靠背部件8角度可始終保持不變，使鏈接8構件和腰部支撐成員7的平行四邊形的4桿的水平。下肢支持成員6部分可以逐步擴展方面的腰部支撐構件按7，以便它可以對應的伸長與他或她的膝關節他或她的膝蓋以下的部分用戶在伸長的位置行動。這個伸長的實現，因?yàn)橛幸粋€(gè)任意長度的4桿鏈接腰部支撐部件7和下肢的支撐構件6的鏈接。在以上所述的闡述中，延伸的數量是50毫米，最大的站立，但值可以適當調整，根據用戶的愿望。俯臥的支撐是站立時必要，直到腰部支撐部件7變?yōu)橄鄬λ矫娴?0°，但超過30°時，站立只能由氣彈簧的力量來完成。其他各種調整，可根據用戶的重量，通過適當調整氣彈簧的反應，此外，氣彈簧，可輕松更換。圖4底角（獨立角度的腰部支撐構件7）和負載之間的關系是一個圖表，顯示一個座位和座位之間的角度和負載 B 腳踏板9。橫坐標代表的座位角（度） ，縱負荷（kgf） 。從輔助站立輪椅 （文獻翻譯) 88圖中可以明顯的看出，主要承擔用戶的重量座位時的角度小，是由腳踏板和座椅時的角度是較大的承載。因此，用戶可以不施加過多的力量需要保持坐姿或站立的姿勢。此外，部分是因?yàn)轶w重的載荷，甚至在座位的最高站立時，用戶可以放心對背部，并順利的工作在站立姿勢。雖然是固定的腳踏板和著地部件10下肢支撐構件在上述體現6中，用戶可以移動，同時保持獨立的姿態，如果還裝有小輪子的輪椅。驅動輪也可能是其操作開關的電動型，安裝操作方便輪椅手肘支撐。雖然是不可折疊的輪椅但它可以改變一個可折疊的類型納入一個折疊的機制。按照本發明，身體支撐架由下肢支撐構件，腰部支撐構件和靠背機構8驅動伸長部件的鏈接機制的巧妙結合。因此，輪椅使用者可以很容易地從坐姿改變到一個獨立站立的位置，反之亦然。即使當用戶承擔獨立的姿態，他或她可以支持身體的支撐框架，使他或她能夠順利地開展工作在獨立的站姿姿態。由于用戶可以利用和保持獨立的姿態，褥瘡和殘疾人關節攣縮與很少或沒有下肢的功能是可以預防的。伸縮機構的氣彈簧的使用，使得其持續并順利地從坐姿改變身體的位置姿態，反之亦然。可以設置其位置，并固定在所需的姿態，更可以使用戶在沒有任何幫助的情況下的姿勢轉變。此外，從坐姿轉移到獨立的姿態，反之亦然，因?yàn)槭謩?dòng)都可以生效，本發明的輪椅操作簡便，并能消除用戶反復使用和保養所造成可能的危險。.輔助站立輪椅 （文獻翻譯) 99WheelchairUnited States Patent 4519649Abstract:A wheelchair is disclosed in which a body support frame pivoted to a main frame can move from a seated posture to a stand-up posture and vice versa without using an external elevating force. The wheelchair includes the main frame for supporting driving wheels and auxiliary wheels and a body support frame formed by interconnecting a lower limb support member, a waist support member and a back rest member to one another. The forward portion of the main frame and the tip portion of the waist support member are turnably supported by a pivot, and an extension member for turnably supporting the waist support member with the pivot as the support point is interposed between the main frame and the waist support member. The motive force for the stand-up operation of the body support frame relies upon the push-up force of the user of the wheelchair (the body lift-up force of the user by his or her upper limbs) and the force of the extension member.1. A wheelchair comprising: a main frame supporting driving wheels and auxiliary wheels;a body support frame including pivotally interconnected lower limb support member, waist support member and backrest member, said main frame and said body support frame being formed as independent structures, a front end portion of said waist support member of said body support frame being pivotally connected to a front end portion of said main frame by pivot means;a pair of elbow supports each fixed to an upper portion of said main frame at respective sides thereof, said waist support member of said body support frame being disposed between said pair of elbow supports in a seating position of said body support frame;a gas spring fitted, at one end thereof, to a gas spring receiver pivotally connected to said main frame, and pivotally connected at its other end by a piston rod thereof to said waist support member of said body support frame such that extension and retraction of said gas spring causes said waist support member to rotate about said pivot means with respect to said main frame; and輔助站立輪椅 （文獻翻譯) 1010locking means in operable connection with said gas spring for locking said gas spring in an arbitrary position between a fully extended and a fully retracted position so as to fix said waist support member at an arbitrary angle with respect to the horizontal within a prescribed angular range of its rotation about said pivot means, said fully extending and fully retracted positions of said gas spring corresponding to seating and standing positions of said body support frame, respectively.2. A wheelchair as defined in claim 1, wherein said locking means comprises a valve operation lever carried by said gas spring receiver for operating a valve of said gas spring, an operation lever mounted on one of said pair of elbow supports, and an operation wire operably connecting said valve operation lever and said operation lever, whereby gripping of said operation lever operates said valve thereby permitting extension and retraction of said gas spring whereas releasing said operation lever causes locking of said gas spring so as to prevent the extension or retraction thereof.3. The wheelchair as defined in claim 1, wherein said waist support member and said back rest member, and said waist support member and said lower limb support member are connected to said main frame by link mechanisms, respectively.4. The wheelchair as defined in claim 3, wherein said link mechanism for said waist support member and said back rest member consists of a parallelogrammic 4-rod link mechanism.5. The wheelchair as defined in claim 3, wherein said link mechanism for said waist support member and said lower limb support member consists of a 4-rod link mechanism having an arbitrary length.輔助站立輪椅 （文獻翻譯) 1111Description:BACKGROUNDThis invention relates to a wheelchair which makes it possible for the handicapped with an extremely limited or no lower-limb function such as a paraplegic to change his or her posture from a seated posture to a stand-up posture and vice versa, using his or her push-up force (the body lift-up action of the handicapped by his or her upper limb) which he or she daily exercises, as the motive force, without using any external power.The wheelchair is a kind of vehicle which is required to cover a range of motion substantially the same as walking and can be regarded as a short-distance transportation vehicle. Accordingly, the wheelchair must have a full function as a daily instrument, a moving function and a function which makes it possible for the handicapped to carry out work by use of the wheelchair. However, in accordance with the conventional wheelchair, the user of the wheelchair can do the work only in the seated posture but cannot do work which can be done only in a stand-up posture because his or her hands cannot reach a high position.Wheelchairs using an external power source (such as motor drive using a battery as the power source) for a stand-up mechanism have been proposed in recent years for a wheelchair which enables the user to do a work in a stand-up posture. However, the wheelchairs of this kind involve the drawbacks that the charging work and maintenance are complicated, that the weight of the wheelchair increases and that the wheelchair itself is extremely expensive with limited versatility.輔助站立輪椅 （文獻翻譯) 1212DRAWINGSFIG. 1 is a side view showing the wheelchair in accordance with one embodiment of the present invention;輔助站立輪椅 （文獻翻譯) 1313FIG. 2 is a rear view of FIG. 1;輔助站立輪椅 （文獻翻譯) 1414FIG. 3 is a perspective view showing the state in which a gas spring as an extension member is used; FIG. 4 is a diagram showing the relation between the seat angle (stand-up angle) and the load applied to the seat and to the foot plate.輔助站立輪椅 （文獻翻譯) 1515PREFERRED EMBODIMENTIn FIGS. 1 and 2, the reference numeral 1 represents a main frame which supports driving wheels 2 and auxiliary wheels 3. An elbow support 4 is fixed to the upper part of the main frame 1 on each side. Reference numeral 5 represents a body support frame which consists of a lower limb support member 6, a waist support member 7 and a back rest member 8. These members are connected in such a manner that the adjacent members are turnable relative to each other. A foot plate 9 and a landing member 10 are fixed to the lower end of the lower limb support member 6. The tip of the waist support member 7 is bent in an arcuate form and a bracket 11 is fixed to the arcuate portion and is turnably fitted to the forward portion of the main frame 1 by a pivot 12. The stand-up mechanism of the body support frame 5 consists of the back rest member 8, the waist support member 7 and the lower limb support member 6 which are connected to one another by two 4-rod links. Among these links, the link for the back rest member 8 and the waist support member 7 is a parallelogrammic 4-rod link connecting the links a and b to the pivot 12, and the link for the waist support member 7 and the lower limb support member 6 is a 4-rod link which connects the joint between the both members 6, 7 and the link c to the pivot 12 and may have an arbitrary or optional length. These two link mechanisms are fitted to the main frame 1.A gas spring 13 as an extension member is interposed between the main frame 1 and the waist support member 7 so that the retracting motion of the spring 13 supports and can raise up and down the waist support member 7 with the pivot 12 as the support point. This gas spring is a kind of spring which utilizes the pressure of a high pressure gas sealed in a cylinder 14 as shown in FIG. 3 so that a piston and a rod 15 connected to the piston inside the cylinder are actuated and are stopped at an arbitrary position. A gas spring receiver 16 is fitted to the main frame 1 while the rod 15 is fitted to the waist support member 7. A valve operation button 17 (hereinafter referred to as a “l(fā)ock button“) can be operated by remote-controlling an operation lever 18 which is fitted to the elbow support member 4. In the drawings, the reference numeral 19 represents an operation wire, and 20, a valve operation lever.When the operation lever 18 is gripped, the valve operation lever 20 and the valve operation button 17 are actuated in the direction indicated by an arrow and release the lock of the gas spring 13. When the grip of the operation lever 18 is released, on the other hand, the valve operation lever 20 and the valve operation button 17 are actuated in the reverse direction whereby the gas spring 13 is locked.輔助站立輪椅 （文獻翻譯) 1616The motive force of the stand-up of the wheelchair in this embodiment relies upon the push-up force of the user of the wheelchair (the force of pushing up the body by the user's upper limbs) and the reaction of the gas spring. The user can take the stand-up posture by use of these two kinds of force. The mode of use is as follows.To stand up, the wheelchair may first be braked, and the knees and waist of user's body may then be fixed firmly to the wheelchair by a belt. After this preparation is completed, the operation lever 18 fitted to the elbow support 4 may be gripped and the lock button 17 of the gas spring is depressed so as to release the lock of the gas spring. In the stage where the lock is released, the gas spring starts operating. In this instance, the user puts his or her hand upon the elbow support 4 and then pushes up to reduce his or her weight acting upon the seat so that the rod 15 of the gas spring extends due to the gas reaction and the seat of the wheelchair starts elevating. During stand-up, the user releases the grip of the operation lever 18 at a desired height so as to eliminate the push force of the lock button 17 and to lock the gas spring. The seat can thus be fixed at that position.To return to the seated posture from the stand-up posture, first the lock of the gas spring may be released by the operation lever 18 and the user may then lower his or her body while gripping the elbow support 4 so as to apply his or her weight to the seat. In this instance, the weight of the user overcomes the gas reaction and the rod of the gas spring contracts so that the seat starts lowering slowly. In this case, too, the user can fix the seat at a desired position by locking the gas spring.In the embodiment described above, the maximum angle of stand-up of the waist support member is 75 degrees relative to the horizontal but the angle can be easily set to any value desired by the user. The angle of the back rest member 8 during stand-up can be always kept constant with respect to the horizontal by the parallelogrammic 4-rod link for the back rest member 8 and waist support member 7. The portion of the lower limb support member 6 can extend gradually with respect to the waist support member 7 so that it can correspond to the extension of the portion of the user below his or her knees with the extension of his or her knee joint during stand-up. This extension is attained because the link for the waist support member 7 and the lower limb support member 6 is constructed by the 4-rod link having an arbitrary length. In the embodiment described above, the quantity of extension is 50 mm with respect to the maximum stand-up but the value can be properly adjusted in accordance with the user's desire. Push-up during stand-up is necessary until the waist support member 7 becomes 30° relative to the horizontal but when it exceeds 30°, stand-up can be accomplished only by the force of the gas spring. Various other adjustments can be made in accordance with the weight of the user by appropriately adjusting the reaction of the gas spring and moreover, the gas spring can be replaced easily.輔助站立輪椅 （文獻翻譯) 11FIG. 4 is a diagram showing the relation between the seat angle (the stand-up angle of the waist support member 7) and the load A applied to the seat and between the seat angle and the load B applied to the foot plate 9. The abscissa represents the seat angle (degrees) and the ordinate the load (kgf). As is obvious from the diagram, the weight of the user is primarily borne by the seat when the angle is small and is borne by the foot plate and the seat when the angle is great. Accordingly, the user can keep the seated posture or the stand-up posture without the need of exerting an excessive force. Moreover, since a part of the weight is borne by the seat even at the time of the maximum stand-up, the user can rest against the back and smoothly carry out work in the stand-up posture.Although the foot plate 9 and the landing member 10 are fixed to the lower end of the lower limb support member 6 in the foregoing embodiment, the user can move the wheelchair while keeping the stand-up posture if small wheels are further fitted. The driving wheel may also be of an electric type with its operation switch being fitted to the elbow support member for easy operation of the wheelchair. Although the wheelchair of the foregoing embodiment is not foldable, it can be changed to a foldable type by incorporating a folding mechanism.In accordance with the present invention, the body support frame consists of the lower limb support member, the waist support member and the back rest member 8 and is actuated by the ingenious combination of the extension member with the link mechanisms. Accordingly, the user of the wheelchair can easily change from a seated position to a stand-up position and vice versa. Even when the user assumes a stand-up posture, he or she can support his or her body by the body support frame so that he or she can smoothly carry out a work in the stand-up posture. Since the user can take and keep the stand-up posture, decubitus and contracture of the joints of the handicapped with a minimal or no lower-limb function can be prevented. The use of the gas spring as the extension member makes it possible to continuously and smoothly change the body support frame from the seated posture to the stand-up posture and vice versa. The seat can be set and fixed at a desired position even during the shift of the posture without any difficulty to the user. Moreover, since the shift from the seated posture to the stand-up posture and vice versa can all be effected manually, the wheelchair of the present invention is easy to operate and can eliminate otherwise likely dangers to the user and complicated maintenance procedures.