喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改 【QQ：414951605 可咨詢交流】=====================
喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改 【QQ：1304139763 可咨詢交流】=====================
喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有,,請放心下載，原稿可自行編輯修改 【QQ：1304139763 可咨詢交流】=====================
黑龍江工程學院本科生畢業設計
附 錄
Introduction of vehicle suspension
Vehicle suspension types and working principle
Select different criteria, different suspension in accordance with the classification of whether the axle disconnect, can be divided into independent suspension and non-independent suspension, the so-called non-independent suspension, both sides of the wheel axle by a monolithic connected with the wheel axle, together with the suspension and chassis through the flexible connection. Characteristics of the wheel when the side of the road shocks encountered beating, there are bound to lead to the other side of the wheel in the car horizontal swing plane, independent suspension is made axle disconnect, and each side of the wheel can be adopted elastic suspension and frame connections, the structure of the complex than that of non-independent suspension, but the wheels on both sides when beating alone can increase the comfort ride, according to the suspension damping and stiffness of whether changes in driving conditions with the change can be divided into passive suspension, semi-active suspension, full-active suspension. Semi-active suspension damping level can also be divided according to class and there are no two types of class-type, although modern automotive suspension a large variety of different structures, but generally by the elastic element, damping components and component-oriented composition. Vehicle suspension model shown in Figure [1] The working principle is: when the impact on automobile tires, the elastic element of the impact of the buffer to prevent the staff of automotive components and damage, but the impact of flexible parts will be produced by prolonged vibration , easy for the driver fatigue accident, it must be a fast decay component damping vibration, shocks when the wheels were beating, the path should be to meet certain requirements, otherwise they will reduce the vehicle ride comfort and stability-oriented component in the transmission at the same time, the need for direction control.
- Unsprung mass - Body mass 、- Spring vibration isolation c- Damper u- Action device l- Tires
Figure one Three of the model suspension
McPherson independent suspension characteristics
McPherson suspension in part by the under arm, steering knuckle assembly (including the shock absorber lower body, wheel axle, brake plate, etc.), steering cross bar, shock absorber upper body, steering rack, wheel assembly , rigid body composed of a total of seven. Damper on
Body with universal joints A hinge connected with the body, steering and shock absorber assembly upper body section cylindrical hinge with bound B, relative to the first half of the shock absorber for axial and rotational movement; under one arm through the rotating hinge F, G connected with the body (one of them is bound to virtual), relative to body up and down swing, the other side through the ball joints and steering knuckle assembly E phase; turned horizontal rod end ball joints C through the steering knuckle assembly and connected to the other side through the universal joints and steering rack hinge connected H; steering rack by moving hinge I connected with the vehicle can be moved around relative body; wheel assembly and the steering knuckle hinge assembly D through the rotation linked to kinematic analysis, the body together with the ground is fixed McPherson independent suspension with a simple structure, non-sprung mass of small, easy engine and steering arrangement, suitable for various forms of spring in the same match as well as to achieve a high degree of auto-body the advantages of regulation. However, due to the location of the kingpin axis and damper hinge connecting the body and cross arm connected with the steering knuckle hinge connection center, so when the suspension in the deformation, the kingpin axis is also changed, front wheel alignment Tread parameters and will also be changed, and change can be very heavy. Therefore, if the structural design of improper suspension, it will greatly affect the use of performance automotive products (such as turning heavy shimmy, side tire wear, tire life impact, etc.)
Hanging at the development's history and current situation
Perfect is the eternal pursuit of mankind. Appears in the carriage, in order to ride more comfortable, humans have been on the coach's suspension - leaf spring carried out tireless explorations, in 1776, with the leaf spring carriage patented, and have been using the 30s to the 20th century, spring before the leaves have been gradually replaced by coil spring, after the car was born, along with in-depth study of the suspension, have a torsion bar springs, gas springs, rubber springs, leaf springs and other elastic parts, emerged in the world in 1934 the first of a the composition of the passive coil spring suspension. Passive suspension model in Figure 1 (a) passive suspension parameters as shown in the light of experience or method to determine the optimum design, moving the process remain unchanged, it is a series of road compromise, it is difficult to adapt to all kinds of complicated traffic, damping the effect of poor, in order to overcome this shortcoming, the use of a non-linear spring stiffness and body height adjustment method, although to a certain extent, but can not eradicate the drawbacks of passive suspension. Mainly used in middle and low passive suspension cars, the modern car with front suspension generally horizontal Stabilizer of McPherson suspension, such as Santana, Charade, Sail and other vehicles, more choice of rear suspension , there are composite longitudinal arm suspension and multi-link suspension, semi-active suspension of the research work started in 1973 by DA Cro sby and DC Karnopp model first put forward, such as 1 (b). semi-active suspension to changes in the main damping suspension, usually less consider changing the stiffness of the suspension. The working principle is: according to the quality of spring on the relative speed of the wheel response to feedback signals, such as acceleration response, in accordance with the laws regulating the control of a certain spring stiffness or the damping force, semi-active suspension force generated with passive suspension, but its damping or stiffness coefficient can be run in accordance with state regulation, which is very similar to active suspension, a class-type semi-active suspension damping is divided into several stages, the damping level by the driver under the "road sense" to choose or automatically by the sensor signals, non-stage semi-active suspension based on road car and driving conditions, the damping of the suspension in a few milliseconds from the smallest to the largest class-free adjustment. Semi-active suspension as a result of simple structure, the work does not require the power consumption of vehicles and can be achieved with the active suspension is similar to the performance, with good development prospects With the continuous development of road traffic, vehicle speed has been very large increase in passive suspension defects has gradually become the bottleneck to improve vehicle performance, for which it was developed taking into account the comfort and stability of the active suspension control. The concept of active suspension in 1954 in the United States General Motors Corp. first proposed suspension design, the active suspension model in Figure 1 (c) below, it is the basis of passive suspension to increase the stiffness and damping adjustable control device, so that in any road vehicle suspension to maintain the best running. Control devices are usually measured by the system, feedback control systems, energy systems and so on. 20th century 80's, world famous automobile companies and manufacturers competing for the research and development of such a suspension, Toyota, Lotus, Volvo, Mercedes-Benz cars, such as in a more successful experiment. Automotive active suspension devices, even in adverse road at high speed, very smooth body, tire noise, steering and braking to maintain the level of the body, and there is a very comfortable ride, but the complex structure of high energy consumption, high cost reliability problems. For various reasons, the vast majority of our used car passive suspension, in the semi-active and active suspension late start of the study, the gap with foreign countries [5]. In Western developed countries, the semi-active suspension in the late 20th century, 80 mature, Ford and Nissan cars on the first application, to obtain good results, in spite of the early-active suspension, but the control of complex, and involves many disciplines, has been very difficult to have a major breakthrough. 20th century 90's, only applies to large displacement of luxury cars, not the domestic automotive products using this technology is reported that only Beijing Institute of Technology and Tongji University, a small number of units, such as active suspension research.
The development trend of suspension
Dynamic suspension is a traditional mechanical structure, rigidity and damping are adjustable in accordance with the random vibration theory, it can only guarantee that the road conditions in a particular good result to achieve, but it is a mature theory, simple structure, reliable performance, cost relatively low and no additional energy, which is most widely used, in our country at this stage, there is still a high research value of the performance of passive suspension L focused on three aspects: ① to carry out stress analysis on the car after the establishment of mathematical model, and then use computer simulation techniques or finite element method to find the optimal parameters of the suspension; ② study variable just springs and variable shock absorber damping, so that the vast majority of traffic on the suspension in good working condition ; ③ research-oriented institutions to meet the automotive suspension ride comfort under the premise of the stability of a large increase in L semi-active suspension of the study focused on two aspects: ① the implementation of strategy; ② Research actuator damping L There are two main adjustable shock absorber, and the other is by changing the size of Orifice damping adjustment, and the other is by changing the viscous liquid vibration damping adjustment, Orifice size, generally through the solenoid valve or stepper motor There are no class or regulation, the higher the cost of this method, the structure of the complex, by changing the viscous damping fluid to change the damping coefficient, simple structure, low cost, no noise and the impact of such characteristics, it is the main direction. Abroad, to change the method of viscous fluid damping mainly ER fluids and magneto-rheological fluid in two. Beijing Institute of Technology, Professor Yi-Ming Zhang a damping adjustable semi-active suspension research, forest for the suspension control of adaptive decision-making research, Professor Chen Zhuoru HIT of the adaptive control of vehicles carried out a study, Study on the implementation of the strategy is through the identification of performance indicators, and then proceed to the controller's settings. At present, the fuzzy control more applications in this regard. Active suspension research focused on two aspects: ① reliability; ② actuators; active suspension as a result of the use of a large number of sensors, microcontroller, and a variety of input-output interface circuits, components to reduce the suspension to increase the reliability, so increasing the degree of component integration is an insurmountable stage . Research line is mainly used in place of hydraulic devices for electrical devices, aerodynamic system of permanent magnet linear servo motor and DC servo motor with a more straight-line advantages of the future will be the executing agency to replace the hydraulic accumulator L to use the electromagnetic principle, combination of parameter estimation self-tuning controller, is expected to design a high-performance low-power electromagnetic energy storage adaptive active suspension, active suspension so that by the theory into practical application of each technology across all disciplines and related development is closely related to computer technology, automatic control technology, fuzzy control, neural networks, advanced manufacturing technology, such as motion simulation for the suspension of further development of strong security, the development of suspension subject to the relevant requirements of the theory of higher so that a new understanding of humanity, and a higher level 。
69
黑龍江工程學院本科生畢業設計
汽車懸架的介紹
汽車懸架種類和工作原理
選取不同的標準, 懸架有不同的分類方法根據車橋是否斷開, 可分為獨立懸架和非獨立懸架，所謂的非獨立懸架, 兩側的車輪由一根整體式車橋相連,車輪連同車橋一起通過彈性懸架與車架連接。特點是當一側的車輪遇到路面沖擊而跳動時, 必然導致另一側車輪在汽車橫向平面內擺動，獨立懸架是車橋做成斷開的, 每一側車輪可以單獨通過彈性懸架與車架連接，結構較非獨立懸架復雜, 但兩側的車輪單獨跳動時互不影響, 可以提高乘坐的平順性，根據懸架的阻尼和剛度是否隨著行駛條件的變化而變化, 可分為被動懸架、半主動懸架、全主動懸架。半主動懸架還可以按阻尼級分為有級式和無級式兩類，雖然現代汽車的懸架種類繁多, 結構差異較大,但一般由彈性元件、減振元件和導向構件組成。汽車懸架的模型如圖工作原理是: 當汽車輪胎受到?jīng)_擊時, 彈性元件對沖擊進行緩沖, 防止對汽車構件和人員造成損傷，但彈性件受到?jīng)_擊時會產生長時間持續的振動, 容易使駕駛員疲勞而發生車禍, 故減振元件必須快速衰減振動，當車輪受到?jīng)_擊而跳動時, 應使其運動軌跡符合一定的要求, 否則會降低汽車的平順性和穩定性，導向構件在傳力的同時, 必須對方向進行控制。
- 簧下質量 - 車身質量 、- 隔振彈簧 c- 阻尼器
u- 作動器 l- 輪胎
圖1 三種懸架的模型圖
麥弗遜獨立懸架的特點
麥弗遜懸架部分由下擺臂、轉向節總成（包括減振器下體、輪轂軸、制動底板等）、轉向橫拉桿、減振器上體、轉向器齒條、車輪總成、車身共7 個剛體組成。 減振器上
體用萬向節鉸A 與車身相連，轉向節總成與減振器上體用圓柱鉸B 約束，相對減振器上半部分可以進行軸向移動和轉動；下擺臂一端通過轉動鉸F,G 與車身相連（其中一個為虛約束），可相對車身上下擺動，另一端通過球鉸E 與轉向節總成相接；轉向橫拉桿一端通過球鉸C 與轉向節總成相連，另一端通過萬向節鉸H 與轉向齒條相連；轉向齒條通過移動鉸I 與車相連，可相對車身左右移動；車輪總成和轉向節總成通過轉動鉸鏈D 相連，進行運動學分析時，車身與地面是固定在一起的[麥弗遜獨立懸架具有結構簡單、非簧載質量小、發動機及轉向系易于布置、適合于同多種形式的彈簧相匹配以及能實現車身高度的自動調節等優點。但是,由于主銷軸線位置在減振器與車身連接鉸鏈中心和橫擺臂與轉向節連接鉸鏈中心的連線上,因此當懸架在變形時,主銷軸線也隨之改變,前輪定位參數和輪距也都會相應改變,且變化量可能很大。因此,如果懸架結構設計不當,就會大大影響汽車產品的使用性能(如轉向沉重、擺振、輪胎偏磨、影響輪胎使用壽命等)
懸價的發展的歷史和現狀
完美是人類永恒的追求。在馬車出現的時候, 為了乘坐更舒適, 人類就開始對馬車的懸架——葉片彈簧進行孜孜不倦的探索,在1776 年, 馬車用的葉片彈簧取得了專利, 并且一直使用到20 世紀30 年代, 葉片彈簧才逐漸被螺旋彈簧代替， 汽車誕生后,隨著對懸架研究的深入, 相繼出現了扭桿彈簧、氣體彈簧、橡膠彈簧、鋼板彈簧等彈性件，1934 年世界上出現了第一個由螺旋彈簧組成的被動懸架。 被動懸架的模型如圖1 (a) 所示被動懸架的參數根據經驗或優化設計的方法確定, 在行駛過程中保持不變，它是一系列路況的折中, 很難適應各種復雜路況, 減振的效果較差，為了克服這種缺陷, 采用了非線性剛度彈簧和車身高度調節的方法, 雖然有一定成效, 但無法根除被動懸架的弊端。被動懸架主要應用于中低檔轎車上, 現代轎車的前懸架一般采用帶有橫向穩定桿的麥弗遜式懸架, 比如桑塔納、夏利、賽歐等車, 后懸架的選擇較多, 主要有復合式縱擺臂懸架和多連桿懸架，半主動懸架的研究工作開始于1973 年, 由D.A. Cro sby 和D. C. Karnopp 首先提出模型如1 (b).半主動懸架以改變懸架的阻尼為主, 一般較少考慮改變懸架的剛度。工作原理是: 根據簧上質量相對車輪的速度響應、加速度響應等反饋信號, 按照一定的控制規律調節彈簧的阻尼力或者剛度，半主動懸架產生力的方式與被動懸架相似, 但其阻尼或剛度系數可根據運行狀態調節, 這和主動懸架極為相似，有級式半主動懸架是將阻尼分成幾級, 阻尼級由駕駛員根據“路感”選擇或由傳感器信號自動選擇，無級式半主動懸架根據汽車行駛的路面條件和行駛狀態, 對懸架的阻尼在幾毫秒內由最小到最大進行無級調節。由于半主動懸架結構簡單, 工作時不需要消耗車輛的動力, 而且可取得與主動懸架相近的性能,具有很好的發展前景[ 4 ]隨著道路交通的不斷發展, 汽車車速有了很大的提高, 被動懸架的缺陷逐漸成為提高汽車性能的瓶頸, 為此人們開發了能兼顧舒適和操縱穩定的主動懸架。主動懸架的概念是1954 年美國通用汽車公司在懸架設計中率先提出的，主動懸架的模型如圖1 (c) 所示，它在被動懸架的基礎上, 增加可調節剛度和阻尼的控制裝置, 使汽車懸架在任何路面上保持最佳的運行狀態?？刂蒲b置通常由測量系統、反饋控制系統、能源系統等組成。20 世紀80 年代, 世界各大著名的汽車公司和生產廠家競相研制開發這種懸架，豐田、洛特斯、沃爾沃、奔馳等在汽車上進行了較為成功的試驗。裝置主動懸架的汽車, 即使在不良路面高速行駛時, 車身非常平穩, 輪胎的噪音小, 轉向和制動時車身保持水平，特點是乘坐非常舒服, 但結構復雜、能耗高, 成本昂貴, 可靠性存在問題。由于種種原因, 我國的汽車絕大部分采用被動懸架，在半主動和主動懸架的研究方面起步晚, 與國外的差距大[5]。在西方發達國家, 半主動懸架在20 世紀80 年代后期趨于成熟, 福特公司和日產公司首先在轎車上應用, 取得了較好的效果，主動懸架雖然提出早, 但由于控制復雜, 并且牽涉到許多學科, 一直很難有大的突破。進入20 世紀90 年代, 僅應用于排氣量大的豪華汽車, 未見國內汽車產品采用此技術的報道, 只有北京理工大學和同濟大學等少數幾個單位對主動懸架展開研究。
懸架的發展趨勢
被動懸架是傳統的機械結構, 剛度和阻尼都是不可調的, 依照隨機振動理論, 它只能保證在特定的路況下達到較好效果，但它的理論成熟、結構簡單、性能可靠, 成本相對低廉且不需額外能量, 因而應用最為廣泛，在我國現階段, 仍然有較高的研究?jī)r(jià)值L被動懸架性能的研究主要集中在三個方面: ①通過對汽車進行受力分析后, 建立數學模型, 然后再用計算機仿真技術或有限元法尋找懸架的最優參數; ②研究可變剛彈簧和可變阻尼的減振器, 使懸架在絕大部分路況上保持良好的運行狀態; ③研究導向機構, 使汽車懸架在滿足平順性的前提下, 穩定性有大的提高L半主動懸架的研究集中在兩個方面: ①執行策略的研究; ②執行器的研究L阻尼可調減振器主要有兩種, 一種是通過改變節流孔的大小調節阻尼, 一種是通過改變減振液的粘性調節阻尼，節流孔的大小一般通過電磁閥或步進電機進行有級或無級的調節, 這種方法成本較高, 結構復雜，通過改變減振液的粘性來改變阻尼系數, 具有結構簡單、成本低、無噪音和沖擊等特點, 因此是目前發展的主要方向。在國外, 改變減振液粘性的方法主要有電流變液體和磁流變液體兩種。北京理工大學的章一鳴教授進行了阻尼可調節半主動懸架的研究, 林野進行了懸架自適應調節的控制決策研究, 哈工大的陳卓如教授對車輛的自適應控制方面進行了研究，執行策略的研究是通過確定性能指標, 然后進行控制器的設定。目前, 模糊控制在這方面應用較多。主動懸架研究也集中在兩個方面: ①可靠性; ②執行器；由于主動懸架采用了大量的傳感器、單片機、輸出輸入電路和各種接口, 元器件的增加降低了懸架的可靠性, 所以加大元件的集成程度, 是一個不可逾越的階段。行器的研究主要是用電動器件代替液壓器件，氣動力系統中的直線伺服電機和永磁直流直線伺服電機具有較多的優點, 今后將會取代液壓執行機構L運用電磁蓄能原理, 結合參數估計自校正控制器, 可望設計出高性能低功耗的電磁蓄能式自適應主動懸架, 使主動懸架由理論轉化為實際應用，技術的每次跨越, 都和相關學科的發展密切相關，計算機技術、自動控制技術、模糊控制、神經網絡、先進制造技術、運動仿真等為懸架的進一步發展提供了有力的保障，懸架的發展也給相關學科提出更高的理論要求, 使人類的認識邁向新的、更高的境界。
73