點膠機械手的結構設計

點膠機械手的結構設計,機械手,結構設計 中文摘要 點膠機又稱涂膠機、滴膠機、打膠機、灌膠機等，專門對流體進行控制。并將流體點滴、涂覆于產品表面或產品內部的自動化機器，可實現三維、四維路徑點膠，精確定位，精準控膠，不拉絲，不漏膠，不滴膠。點膠機主要用于產品工藝中的膠水、油漆以及其他液體精確點、注、涂、點滴到每個產品精確位置，可以用來實現打點、畫線、圓型或弧型。 現在根據用戶的需求，對AB膠水進行點膠機械手的設計，根據膠水的性質，我們選擇絲桿推膠，于是我進行大體設計，確定標準件的種類，非標準件材料的選擇，于是再進行非標準件的設計，畫出二維圖紙，進行受力計算，確定標準件的具體型號。對于無法確定的尺寸，而我們把三維圖形畫出來，并且裝配好之后再量取數據。對于一些設計不合理的零件，我們邊設計邊修改。 ABSTRACT Also known as glue dispenser machine, dispensing machine, plastic machine, plastic irrigation machines, specialized fluid control.And a fluid drip, coated on the interior surface of the product or product automation machines, enabling three-dimensional, four-dimensional path dispensing, accurate positioning, precise control of glue, not drawing, not leak glue,no epoxy.Dispensing technology products are mainly used in glues, paints and other liquid precise point, injection, coating, drip into the precise location of each product can be used to achieve the RBI, drawing a line, circle or arc. Now according to the user's needs, AB glue dispensing robot be designed according to the nature of glue, we chose to push plastic screw, so I carried out the general design, determine the type of standard parts, non-standard pieces of material choice, so then non-standard design, draw two-dimensional drawings, conducted by the force calculations to determine the specific type of standard parts.For unable to determine the size, but we have drawn three-dimensional graphics, and the amount of data after re-assembled. For some poorly designed parts, we edge to edge design modifications.中文摘要 ABSTRACT 目 錄 第一章 緒論 ……………………………………………………………………1 1.1點膠機特點 ……………………………………………………………………1 1.2 工作原理 ………………………………………………………………………1 1.3 常見問題 ………………………………………………………………………1 1.4 廠商需點膠水類型 ……………………………………………………………3 1.5 廠商膠量要求 …………………………………………………………………3 第二章 點膠機械手零件的設計 …………………………………………………4 2.1 概念設計 ………………………………………………………………………4 2.1.1 點膠方式選擇 ………………………………………………………………4 2.1.2 模型設計 ……………………………………………………………………4 2.1.3 標準件的名稱確定 …………………………………………………………4 2.2 實體設計 ………………………………………………………………………5 2.2.1 膠管夾具設計 ………………………………………………………………5 2.2.2 混合膠管的選擇 ……………………………………………………………7 2.2.3 氣缸的選擇 …………………………………………………………………8 2.2.4 氣缸與Y型點膠閥連接件的設計 …………………………………………9 2.2.5 點膠氣缸固定基座的設計 ………………………………………………10 2.2.6 點膠旋轉片的設計…………………………………………………………11 2.2.7點膠蠅嘴固定座的設計……………………………………………………12 2.2.8 點膠安裝板的設計…………………………………………………………13 2.2.9 滾珠絲桿的選擇……………………………………………………………14 2.2.10 導柱的設計 ………………………………………………………………19 2.2.11 導套的設計 ………………………………………………………………20 2.2.12 代號為J004的零件是設計………………………………………………20 2.2.13 鎖緊座的設計 ……………………………………………………………21 2.2.14 代號為J001的零件是設計………………………………………………22 2.2.15 推桿的設計 ………………………………………………………………23 2.2.16 推膠頭的設計 ……………………………………………………………24 2.2.17 代號為J006的零件的設計 ……………………………………………25 2.2.18代號為J005的零件的設計 ………………………………………………26 2.2.19代號為J007的零件的設計 ………………………………………………27 2.2.20 滑板的設計………………………………………………………………27 2.2.21 電機的選擇 ………………………………………………………………28 2.2.22 聯軸器的選擇 ……………………………………………………………29 第三章 實體圖片…………………………………………………………………32 第四章 總結………………………………………………………………………34 參考文獻……………………………………………………………………………35