1591-五軸加工中心的數控編程后置處理研究（只有說明書）

1591-五軸加工中心的數控編程后置處理研究（只有說明書）,加工,中心,數控,編程,后置,處理,研究,鉆研,只有,說明書,仿單 I五軸加工中心的數控編程后置處理研究學生姓名：陳瑞良 班級：068105306指導老師：于斐摘要: 通常，直接利用通用后置處理器生成的 NC 代碼與用戶使用的數控機床和系統的要求不符，不能生成正確的加工程序， 導 致數控加工不能安全、可靠地進行，并且通用后置處理器不能輸出機床數控系統所特有的輔助功能，使得數控機床特性功能的利用受到影響。本課題針對MIKRON UCP 600 Vario型五軸加工中心及配置的Heidenhain iTNC 530數控系統進行了 專用后置處理的研究，開發了后置處理程序， 該程序能夠根據刀位源文件生成數控加工程序，且無需二次更改，就可以實現五軸聯動數控加工。Heidenhain iTNC 530數控系統除了具備ISO標準的 輔助功能以外，還有其它特有的輔助功能，針對輔助功能和五坐標數控加工機床的特殊性，利用UG/Post Builder后置處 理器， 實現了模態輔助功能指令M126、M128的輸出和非模態輔助功能指令循環32的輸出。通過 用戶自定義功能，以 Tcl語言為開發語言，實現了在生成NC程序的同時輸出總加工時間、每道工序的加工時間和刀具信息。將專用后置處理程序與UG集成，實現了在 UG中調用后置處理程序自動生成數控加工代碼。關鍵詞：五坐標加工 數控編程 后置處理 加工仿真 整體葉輪指導老師簽名：IIStudy on Post Processing for NC Programming of Five-axis Machining CenterStudent name: Chen Rui Liang Class: 0681053Supervisor: Yu FeiAbstract：Usually, the NC code generated by the general post processor doesn't match with the request of the numerical control machine and the its system. Thus it cannot produce the correct processing procedure, results in the numerical control processing can not be carried out with safety and reliabitlity, furthermore, the general post processor cannot output the unique auxiliary function of the machine numerical control system, which causes the characteristics and functions of the numerical control machine to be used efficaciously or correctly.Aimed to MIKRON UCP 600Vario five-axis machining center and Heidenhain iTNC 530 numerical control system, the special-purpose post-processing was studied, and the post-processing programme was develope in this paper. This programme can produce NC processing procedure according to the cutter location source file, and it is not necessary to conduct second alteration, then it can realize five-axis simultaneously controlled NC processing.Besides the ISO auxiliary function, HEIDENHAIN iTNC 530 numerical control system also has many other unique auxiliary functions. Aim to these functions and the particularity of five-axis NC machining and post-processing UG/Post Builder we conducted the output of the modality assistance function instruction M126, the M128 and the output of the non-modality assistance function instruction circulation 32. Through the user-defined functions, taking the Tcl as the development language, the subject has realized to output the total process time and each working procedure process time and tool-information while produces the NC procedure. The integration of special-purpose post-processing procedure and the UG has attained automatically to produce the numerical control processing code by transferring the post-processing procedure in UG.IIIKeywords：Five-axis machining NC programming Post processing Machining simulation Integral impeller Signature of supervisor: