機械手-兩足行走機器人

機械手-兩足行走機器人,機械手,行走,機器人 南京理工大學泰州科技學院 畢業設計說明書(論文) 作 者: 黃俊 學 號： 05010213 系　部: 機械工程系 專 業: 機械工程及自動化 題 目: 兩足行走機器人 —行走控制部分設計 指導者： 路建萍 劉艷 評閱者： 龔光容 2009 年 6 月 畢業設計說明書（論文）中文摘要 兩足步行機器人不僅在教學、比賽和娛樂等方面應用廣泛，并且也可以作為兩足步行研究的平臺。本文在“KONDO”兩足步行機器人的機械結構的基礎上，設計了基于AVR處理器的兩足步行機器人控制系統，包括硬軟件設計及其實現；設計了兩足步行機器人的步行模式，實現了在平面上的穩定步行。在硬件電路的處理器中，移植了u C/OS-II操作系統，實現了兩足步行機器人控制系統的各項功能，建立了完整的兩足步行機器人控制系統軟件框架；改進了通常的多路PWM信號產生方法，使控制信號的精度達到了lus以上，解決了由于中斷嵌套影響控制信號精度，從而引發機器人抖動的問題；并對機器人進行了關節調試。 關鍵詞 機器人 處理器 操作系統 畢業設計說明書（論文）外文摘要 Title The Biped Walking Robot Designs Abstract The Biped walking desktop-robot is not only applied widely in teaching, competitions and entertainments, but also treated as a research tool of biped walking. In this thesis, a control system for biped walking desktop-robot is designed, which is based on AVR, and works well in the mechanism of the KONDO biped walking desktop-robot. A walking astern for the biped robot is presented, and the robot can walk stably on the flat. The open-code operating system, uC/OS-II is explanted to the processor of the circuit. Under the operating system, several tasks and interrupt service routines are resigned to accomplish the functions of the control system for the biped working boot. The frame of software is completed, which is for the control system for biped asking desktop-robot. A improved method of producing multiple PWM signals is resented, and the precision of the control signal can be improved to 111 s, and the problem that the robot shakes because of the interrupt-nesting is solved. A test to the articulations of the robot is done. Keywords Robot Processor Control System